Business Wire

SKILLCELL

1.10.2020 18:25:11 CEST | Business Wire | Press release

Share
EasyCOV, the Virological Saliva Test for COVID19 Confirms Its Excellent Results: a Sensitivity of 88% and a Specificity of 99% in 40 Min

EasyCOV, a virological saliva detection test for COVID19, has shown a sensitivity of 88% and a specificity 99% during a clinical trial performed at the testing center operated by the teaching hospital of Montpellier. The test relies on an optimized thermal protocol that provides the results in 40 minutes.

EasyCOV, developed by SkillCell in collaboration with the CNRS (French National Center for Scientific Research), is a saliva test that can be run in the field and that provides results in the form of a change of color in no more than 40 minutes. Performed by a healthcare professional, the test requires the collection of 200 microliters of saliva, approximately 4 drops, from under the patient’s tongue. The sample is heated successively in two tubes using the nomadic heating device EasyVID (developed and produced by TRONICO, sister company of SkillCell). A test turning bright yellow indicates that the virus has been detected while an orange test is negative.

A double-blind clinical trial has been conducted at the teaching hospital of Montpellier, France, in real life conditions at the testing center operated by the hospital. During this clinical trial, nasopharyngeal and saliva samples were collected simultaneously and analyzed via RT PCR. These two analyses were used as a basis to establish the infection status of the participants. This status was then compared to the results of EasyCOV test. This analysis showed a sensitivity of 87.5% and a specificity of 99.4% for 220 participants, including 40 positive patients with and without symptoms. EasyCOV test was performed using a thermal protocol giving results in 40 min.

EasyCOV demonstrates with this trial that it is high quality, faster, cost-efficient and not invasive test that can be performed in a large variety of locations without requiring heavy investments.

Alexandra Prieux, President of SkillCell commented « EasyCOV is a unique and necessary tool in the fight against COVID 19. It is a real satisfaction for the team that our test is able to bring a concrete answer to the sanitary and economic challenges that we face today. ».

The EasyCov programme is supported by the French Ministry of Armed Forces via the Direction Générale de l’Armement (Directorate General of Armaments - DGA) and the Agence de l’Innovation de Défense (Defense Innovation Agency - AID).

About SKILLCELL

SkillCell develops in-field diagnostic tests using its simplicity-centered approach: tests capable of being used by anybody, anywhere and at any time. Founded in Guadeloupe in 2017, the company has offices in France in Jarry (Guadeloupe), Paris and Montpellier. The SkillCell team brings together scientific experts and seasoned manufacturers to find solutions to medical and environmental diagnostic testing issues by providing relevant, high-quality information that allows users to make well-informed choices with full transparency. SkillCell is a subsidiary of ALCEN group. For more information: www.skillcell-alcen.com

Link:

ClickThru

About Business Wire

Business Wire
Business Wire
101 California Street, 20th Floor
CA 94111 San Francisco

http://businesswire.com

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Spatial Announces Release 2027 1.0 with New Enhancements Across CAD Modeling, Interoperability, Data Preparation, and Meshing17.11.2026 20:10:00 CET | Press release

Spatial Corp., the leading software development kit provider for design, manufacturing and engineering solutions and a subsidiary of Dassault Systèmes, today announced the availability of its 2027 1.0 Release. This latest release introduces new capabilities and enhancements across Spatial's 3D ACIS Modeler, CGM Modeler, 3D InterOp, Data Prep and CSM/CVM product lines. Designed to improve efficiency, flexibility and robustness across CAD modeling, interoperability, data preparation and simulation workflows, the release delivers enhanced geometry processing, expanded modeling capabilities, improved CAD translation and advances in mesh generation for a better workflow coverage. 3D ACIS Modeler Enhanced Blending (Filleting) The 3D ACIS Modeler introduces support for asymmetric fixed-width blends with a conic cross-section, providing users with finer control over smooth transitions between edges. This enhancement builds on the symmetric fixed-width blend with a conic cross-section capabilit

Global EV Alliance Survey: EV Drivers Identify Myths and Misconceptions as the Biggest Barrier to Adoption17.11.2026 19:00:00 CET | Press release

Myths and misconceptions about electric cars, from battery lifespan and fire risk to grid collapse, are the biggest barrier to EV adoption, according to respondents to the annual Global EV Driver Survey. The 2026 survey draws on responses from more than 29,500 EV drivers across 34 countries. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261117539716/en/ MYTHS. Battery lifespan (72%), fire risk (58%) and grid collapse (45%) top the list of EV myths reported by respondents to the 2026 Global EV Driver Survey, which gathered responses from more than 29,500 EV drivers across 34 countries. “The EV transition is not just an infrastructure or affordability challenge. It is also an information challenge. Outdated information and misconceptions continue to influence decisions long after the technology has moved on,” says Ellen Hiep, from the Steering Committee of the Global EV Alliance (GEVA). Myths the greatest barrier Asked to ide

TreeFrog Therapeutics Appoints James Sterling as Chief Financial Officer17.11.2026 18:04:00 CET | Press release

Seasoned biotech CFO with gene therapy, diagnostics, IPO and Wall Street experience joins the executive leadership team TreeFrog Therapeutics, a biotechnology company developing scalable cell therapies built on its proprietary C-Stem™ technology, today announced the appointment of James Sterling as Chief Financial Officer, effective November 1, 2026. James joins TreeFrog’s executive leadership team and reports to Mark Rothera, President and Chief Executive Officer. He oversees finance, investor relations and corporate development as the company enters its next phase of growth. “I am delighted to welcome James to TreeFrog. James brings a valuable combination of biotech CFO and Wall Street experience that supports our ambitions to develop TreeFrog into a key enabling partner and drug developer in the regenerative medicines field,” said Mark Rothera, President and Chief Executive Officer of TreeFrog Therapeutics. James contributes deep experience in corporate finance, capital markets and

Visa Report: AI-Enabled Fraud and Third-Party Attacks Are Scaling Worldwide17.11.2026 16:40:00 CET | Press release

Third-party incidents surged 62%, while Visa Scam Disruption identified more than $1.4 billion in potential fraud Fraud is becoming more automated, targeted and global as criminals use AI to exploit weak points across the payments ecosystem and target third-party providers that can provide access to multiple downstream payment organizations, according to the Visa (NYSE: V) Fall 2026 Biannual Threats Report released today during International Fraud Awareness Week. Developed by Visa Payment Ecosystem Risk and Control (PERC), the report examines threat activity observed between January and June 2026 and finds that AI is not creating entirely new categories of fraud. Instead, it is helping criminals that execute existing attacks faster, at greater scale, and with greater precision, while increasingly targeting third-party providers that can provide access to multiple downstream organizations at once. Although attack volumes increased in several areas, the report also found evidence that co

Sparxity Appoints former Cray CEO Peter Ungaro and Semiconductor Veteran Daniel Armbrust to its Advisory Board17.11.2026 16:00:00 CET | Press release

Appointments bring decades of leadership experience in supercomputing, semiconductor commercialization, and scaling advanced computing business Sparxity, a leader in sparse-native computing, today announced that Peter Ungaro, former President and CEO of Cray, Inc., and Daniel Armbrust, former President and CEO of SEMATECH and co-founder of Silicon Catalyst, have joined its Advisory Board as independent members. Armbrust has been elected Chairman of the Advisory Board and Ungaro Deputy Chairman by their fellow board members. The appointments strengthen the company’s leadership as it scales its sparse-native computing technology for next-generation AI and high-performance computing (HPC). This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261117761685/en/ From left to right, Daniel Armbrust, former President and CEO of SEMATECH and co-founder of Silicon Catalyst and Peter Ungaro, former President and CEO of Cray, Inc. Peter Ungaro

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye