NY-APTORUM-GROUP
21.12.2020 12:02:16 CET | Business Wire | Press release
Regulatory News:
Aptorum Group Limited (Nasdaq: APM, Euronext Paris: APM) (“Aptorum Group” or “Aptorum”), a biopharmaceutical company focused on novel technologies for the treatment of a variety of medical conditions including infectious diseases, announced that the company, through its wholly owned subsidiary Aptorum International Limited, has submitted a Clinical Trial Application (CTA) with the Public Health Agency of Canada (Health Canada) to conduct a Phase 1 clinical trial of ALS-4, an orally administered small molecule drug for the treatment of infections caused by Staphylococcus aureus including Methicillin-resistant Staphylococcus aureus (MRSA). Pending Health Canada’s approval, the Phase 1 trial is designed to test the safety, tolerability and pharmacokinetics of ALS-4 in healthy volunteers.
Dr. Clark Cheng, Chief Medical Officer and Executive Director of Aptorum Group, commented: “Further to our previous update in September 2020, we are pleased to announce this CTA submission which represents a major development milestone for our ALS-4 antimicrobial program. ALS-4 is a novel small molecule adopting an anti-virulence (non-antibiotic) approach to address the growing unmet medical needs of infections caused by Staphylococcus aureus . ALS-4 is an orally administered drug and thereby aligning with global healthcare policy to actively promote the switch from an IV to oral based antimicrobial treatment1,2,3 . As shown in our internal preclinical data and subject to further clinical trials, ALS-4 can be potentially used on a standalone basis or in combination with existing antibiotics (for example, vancomycin) with the aim to reduce mortality and morbidity of the infected patients especially in severe cases. We believe that our orally administered ALS-4 drug can potentially also tackle a variety of infections caused by Staphylococcus aureus , including (but not limited to) MRSA bacteremia and skin & soft tissue infections, subject to the respective clinical trials.”
The Phase 1 clinical trial is planned to be conducted in Canada and targeted to recruit up to 48 and 32 healthy volunteers for the single-ascending dose (SAD) and multiple- ascending dose (MAD) cohorts, respectively. The primary objective of the trial is to evaluate the safety and tolerability of SAD and MAD of ALS-4 administered orally to healthy subjects. The secondary objective is to assess the pharmacokinetic profile of SAD and MAD of ALS-4 administered orally to healthy subjects.
About ALS-4
As part of Aptorum Group’s Acticule infectious disease platform, ALS-4 is a novel first-in-class orally administered small molecule drug based on an anti-virulence (non-antibiotic) approach targeting Staphylococcus aureus including MRSA. ALS-4 targets to inhibit the virulence properties of the bacteria and render them highly susceptible to the host’s immune clearance and also potentially provide added benefits in combination with existing antibiotics.
About Aptorum Group
Aptorum Group Limited (Nasdaq: APM, Euronext Paris: APM) is a biopharmaceutical company dedicated to the discovery, development and commercializing of therapeutic assets to treat diseases with unmet medical needs, particularly infectious diseases and cancers (including orphan oncology indications). The pipeline of Aptorum is also enriched through the establishment of drug discovery platforms that enable the discovery of new therapeutics assets through programs such as the systematic screening of existing approved drug molecules and microbiome-based research platform for treatments of metabolic diseases. In addition to the above main focus, the company is also pursuing therapeutic and diagnostic projects in neurology, gastroenterology, metabolic disorders, women’s health and other disease areas. Aptorum also has projects focused on surgical robotics and natural supplement for women undergoing menopause and experiencing related symptoms.
For more information about Aptorum Group, please visit www.aptorumgroup.com .
Disclaimer and Forward-Looking Statements
This press release does not constitute an offer to sell or a solicitation of offers to buy any securities of Aptorum Group.
This press release includes statements concerning Aptorum Group Limited and its future expectations, plans and prospects that constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. For this purpose, any statements contained herein that are not statements of historical fact may be deemed to be forward-looking statements. In some cases, you can identify forward-looking statements by terms such as “may,” “should,” “expects,” “plans,” “anticipates,” “could,” “intends,” “target,” “projects,” “contemplates,” “believes,” “estimates,” “predicts,” “potential,” or “continue,” or the negative of these terms or other similar expressions. Aptorum Group has based these forward-looking statements, which include statements regarding projected timelines for application submissions and trials, largely on its current expectations and projections about future events and trends that it believes may affect its business, financial condition and results of operations. These forward-looking statements speak only as of the date of this press release and are subject to a number of risks, uncertainties and assumptions including, without limitation, risks related to its announced management and organizational changes, the continued service and availability of key personnel, its ability to expand its product assortments by offering additional products for additional consumer segments, development results, the company’s anticipated growth strategies, anticipated trends and challenges in its business, and its expectations regarding, and the stability of, its supply chain, and the risks more fully described in Aptorum Group’s Form 20-F and other filings that Aptorum Group may make with the SEC in the future, as well as the prospectus that received the French Autorité des Marchés Financiers visa n°20-352 on 16 July 2020.
As a result, the projections included in such forward-looking statements are subject to change and actual results may differ materially from those described herein. Aptorum Group assumes no obligation to update any forward-looking statements contained in this press release as a result of new information, future events or otherwise.
This announcement is not a prospectus within the meaning of the Regulation (EU) n°2017/1129 of 14 June 2017 as amended by Regulations Delegated (EU) n°2019/980 of 14 March 2019 and n°2019/979 of 14 March 2019.
This press release is provided “as is” without any representation or warranty of any kind.
1
https://www.gloshospitals.nhs.uk/gps/antimicrobial-resources/adult-antibiotic-treatment-guidelines-site-infection/iv-oral-switch-guideline/
and https://www.dbth.nhs.uk/wp-content/uploads/2017/10/IV-to-oral-switch-and-5-day-stop-policy.pdf
2
https://hgs.uhb.nhs.uk/wp-content/uploads/Guidelines-for-Antimicrobial-Prescribing-v5.0.pdf
3
https://www.jwatch.org/na48403/2019/02/12/sequential-intravenous-oral-treatment-mrsa-bacteremia
View source version on businesswire.com: https://www.businesswire.com/news/home/20201221005196/en/
Link:
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Kioxia and Sandisk Begin Production of 10th-Generation 3D Flash Memory Products atKitakami Plant Fab23.7.2026 12:19:00 CEST | Press release
Companies Showcase Ongoing Buildout of Manufacturing Infrastructure at K2 to Address Growing Demand for NAND Flash Kioxia Corporation, a subsidiary of Kioxia Holdings Corporation (TOKYO: 285A) and Sandisk Corporation (Nasdaq: SNDK) today announced the start of production for their 10th-generation 3D Flash memory technology at Fab2 (K2) at the Kitakami Plant in Iwate Prefecture in Japan. The milestone comes as the companies continue to drive meaningful, multi-year bit growth to address the strong demand for their innovative flash memory technology. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260702296115/en/ Unveiling ceremony for the K2 facility In conjunction with the start of production, the companies held an unveiling ceremony for the K2 facility. Opening in September 2025, the facility has produced the companies’ 8th-generation 3D flash memory products and will begin to scale production with the introduction of their
VeriSilicon Introduces CPP2000 Camera Post-Processing IP for Embodied Robotics and Mobile Vision Applications3.7.2026 12:02:00 CEST | Press release
Enhancing image quality and visual perception for moving-camera systems VeriSilicon (688521.SH) today announced its high-performance CPP2000 Camera Post-Processing (CPP) IP, expanding the company’s Image Signal Processing (ISP) solutions with advanced post-processing capabilities. By improving image quality and visual perception in mobile imaging scenarios, CPP2000 enables more reliable vision performance in robotics, drones, and other mobile vision applications. CPP2000 integrates multiple image processing technologies and can further optimize YUV images output from image signal processors. The IP supports image and video processing at up to 8K resolution and offers multiple hardware configuration options to meet diverse requirements in Power, Performance, Area (PPA), and latency across different applications. CPP2000 leverages the combined operation of multiple image processing technologies, including motion-compensated temporal filtering, advanced spatial noise reduction, chroma adj
Messer Acquires Singapore-Based Industrial Gas Platform; Japan Corporate Advisory Institute Advises Sellers3.7.2026 11:11:00 CEST | Press release
Acquisition of WKS Group strengthens Messer’s Southeast Asia presence Messer, the world’s largest privately held specialist for industrial, medical, electronic and specialty gases, has acquired WKS Group, a Singapore-based industrial gas platform with operations across Singapore and southern Malaysia. Transaction terms were not disclosed. Messer reported consolidated sales of approximately EUR 4.5 billion for its 2025 financial year. Founded in Singapore in 1977, WKS Group comprises six companies and employs approximately 195 people across Singapore and southern Malaysia. The acquisition expands Messer’s operating footprint in Southeast Asia and strengthens its access to key industrial clusters across the region. “We are pleased to have completed this transaction with Messer, whose strategic vision makes them an excellent partner for WKS Group,” said Mr. Wong Koh Hoi, shareholder of WKS Group. “We appreciate JCAI’s professionalism and dedication throughout the process, and their expert
Access Advance Welcomes Meta Platforms, Inc. and Alibaba Group to the Video Distribution Patent Pool3.7.2026 01:00:00 CEST | Press release
Access Advance LLC today announced that Meta Platforms, Inc., one of the world's largest distributors of video content across its Facebook, Instagram, Threads, and WhatsApp services, has joined the Video Distribution Patent Pool (VDP Pool) as a Licensee. Meta also joined both the HEVC Advance and VVC Advance pools as a Licensee. Alibaba Group, whose video infrastructure spans a wide range of video-based services across e-commerce, entertainment, and digital media platforms, was also announced as a VDP Pool Licensee this week. Meta and Alibaba joining the VDP Pool further reinforces the program’s market leading position in resolving the licensing issues around the use of modern video codecs, including VP9, AV1, HEVC and VVC, across all the diverse business models of internet video streaming. "A significant U.S.-based company like Meta joining as a Licensee is a milestone moment for the content distribution business and the VDP Pool," said Peter Moller, CEO of Access Advance. "Meta reach
Kioxia Commences Sample Shipments of 10th-Generation BiCS FLASH™ Devices Delivering High Performance, High Capacity and Low Power Consumption3.7.2026 01:00:00 CEST | Press release
Production planned at Fab2 of Kitakami Plant Kioxia Corporation, a world leader in memory solutions, today announced that it has commenced sample shipments of 1Tb (terabit) Triple-Level-Cell (TLC) memory devices utilizing its 10th-generation BiCS FLASH™ 3D flash memory technology.1 These will be primarily integrated into the company’s enterprise and data center SSDs, strengthening Kioxia’s lineup to meet the growing demand for AI storage, which requires higher performance, higher capacity, and lower power consumption. These new products will be manufactured using state-of-the-art equipment at Kioxia’s Kitakami Plant Fab2 facility in Iwate Prefecture, Japan. By leveraging innovative CMOS directly Bonded to Array (CBA) technology2 and On-Pitch Select Gate Drain (OPS) technology,3 both adopted since the 8th-generation BiCS FLASH™, the 10th-generation technology achieves a NAND interface speed of 4.8 Gb/s,4 a 33% improvement over the 8th generation. Bit density has increased by 59% by stac
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom
