NE-DESIGN-DATA
Design Data, a leader in 3D steel detailing and Building Information Modeling (BIM) software, announced that the Steel Construction Institute (SCI) has recently assessed Design Data’s SDS/2 2016 software for connection design.
SDS/2 takes a uniquely intelligent approach in its connection design by considering framing conditions and erectability, automatically performing clash prevention as a part of its connection design. In addition, SDS/2 can value engineer the connections on a project, helping users to design the most economical connections to fabricate and erect.
SCI’s process involved reviewing connection design output in depth for each connection type: partial depth end plates, fin plates, column splices, beam splices, bracing connections, and bolted moment connections (end plates). Each connection was reviewed in detail for numerical correctness for the specific arrangement, but also to demonstrate that important principles common to all connections were correctly implemented.
SCI’s assessment was made in accordance with Eurocode 3: Design of steel structures, BS EN 1993, and the relevant UK National Annexes. Additionally, the “Green Books” were used as reference documents, being referenced in the U.K. National Annex and the de facto standard in the U.K.
“Achieving SCI Assessed status is a key advantage for us entering the U.K. and European markets,” said Damon Scaggs, president of Design Data. “With incorporating European design codes for the first time into SDS/2 — which already implements American, Canadian and Australian design codes — it was important to subject the software to the rigorous and extensive testing SCI conducted. This will help give our new European customers the confidence in our connections that our customers around the world have had for more than 30 years.”
According to the SCI Assessed website, “SCI Assessed” is an established quality mark that is awarded to testify that manufacturers' technical data has been independently verified by SCI. The scheme provides reliability for the range of performance data offered by suppliers particularly where, for example, the product is new or the values are based on calculation methods outside the scope of established standards.
About Design Data
Design Data, a Nemetschek company, is a leading software innovator for the steel industry's fabrication, detailing and engineering sectors. SDS/2 software products provide automatic connection optimization, detailing, engineering information, fabrication data and much more, reducing the time required to design, detail, fabricate and erect steel. Founded in 1981 and headquartered in Lincoln, Nebraska, USA, the company serves customers in 17 countries. Information on Design Data and SDS/2 can be found at: www.sds2.com .
About SCI
SCI has been a trusted, independent source of information and engineering expertise globally for over 30 years, and remains the leading, independent provider of technical expertise and disseminator of best practice to the steel construction sector. SCI offers comprehensive advice, technical information, consultancy services and membership for manufacturers, engineers and designers for every aspect of steel construction.
View source version on businesswire.com: http://www.businesswire.com/news/home/20170523005367/en/
Contact:
Design Data
Damon Scaggs, 402-441-4000
President
Fax:
402-441-4045
damon@sds2.com
www.sds2.com
Link:
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Kaneka Obtains Halal Certificate for KANEKA UBIQUINOL TM9.7.2025 03:30:00 CEST | Press release
Kaneka Corporation (Headquarters: Minato-ku, Tokyo; President: Kazuhiko Fujii) (TOKYO:4118) has obtained “Halal Certificate (Certification Number: 355-TSRI/24)” for its functional food ingredient, KANEKA UBIQUINOLTM (active form of coenzyme Q10) powder, under the assessment of Shariah Research Institute of Takushoku University, and issued by JAPAN MUSLIM ASSOCIATION, a religious corporation, on May 28. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20250708279133/en/ Halal certificate Halal certification is a system in which relevant organizations verify that products or services do not contain ingredients prohibited under Shariah (Islamic law) and certify their compliance with Shariah. We actively pursue the acquisition of various certifications to ensure the safety and security of our raw materials, and we are pleased to announce that we have obtained a Halal Certificate for KANEKA UBIQUINOLTM. Currently, the Muslim populati
SiPearl: Final closing of €130m Series A with Cathay Venture (Taiwan), EIC Fund and France 20308.7.2025 17:25:00 CEST | Press release
Tape-out of Rhea1, the most complex processor ever designed in Europe which will equip JUPITER, the 1st European exascale supercomputer Largest Series A in the European fabless semiconductor industry including €32m in new funding to close Series A and prepare the launch of Series B Strengthening ties with Taiwan’s semiconductor ecosystem to complement Europe’s sovereignty in supercomputing and AI SiPearl, the company building European high-performance energy-efficient processors for supercomputing and AI has achieved the definitive closing of its €130m Series A with a third tranche of €32m. Seed funded by the European Union, SiPearl was launched in January 2020 under the auspices of the European Processor Initiative consortium which aims to foster the return of high-performance energy-efficient processor technologies in Europe. Since then, the company has fulfilled its mission by building a world-class processor team of 200 employees in France, Spain, and Italy, set up its own sovereig
LambdaTest Unveils Smart Branching and Baseline Management to Modernize Visual Testing Workflows8.7.2025 17:00:00 CEST | Press release
SmartUI now aligns visual testing with real-world development practices, eliminating baseline confusion and making visual QA effortless across teams LambdaTest, a GenAI-powered quality engineering platform, has announced the release of SmartUI’sSmart Branching and Baseline Management, a major leap forward in visual testing. This update eliminates long-standing bottlenecks caused by outdated baseline strategies and introduces an intelligent, streamlined way for development teams to manage visual testing across complex Git workflows. Modern development teams utilise feature branches, release versions, and hotfix workflows; however, most visual testing tools still rely on comparisons against the main branch, resulting in irrelevant failures and time-consuming approvals. LambdaTest’s SmartUI changes that with features purpose-built for today’s branching strategies. Smart Branch Comparison ensures visual tests are run against the correct baseline, comparing within the same feature branch in
Connectivity as Versatile as the Aircraft, Starlink High-Speed Internet Now Available for Cessna Caravan8.7.2025 16:00:00 CEST | Press release
Textron Aviation Inc., a Textron Inc. (NYSE: TXT) company, today announced an additional high-speed internet connectivity solution for the Cessna Citation Caravan following the Federal Aviation Administration’s (FAA) issuance of AeroMech’s Supplemental Type Certificate (STC) for Starlink high-speed internet connectivity. AeroMech’s STC utilizes Starlink’s constellation of Low Earth Orbit (LEO) satellites to provide more reliable connectivity over land, water and remote areas, where traditional in-flight Wi-Fi may not have service. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20250708514119/en/ Textron Aviation announced an additional high-speed internet connectivity solution for the Cessna Citation Caravan following the Federal Aviation Administration’s (FAA) issuance of AeroMech’s Supplemental Type Certificate (STC) for Starlink high-speed internet connectivity. (Photo: Textron Aviation) “The Cessna Caravan is so versatile,
Rigaku Announces STAvesta, a Thermal Analyzer Tailor-made for Next-generation Material Development8.7.2025 16:00:00 CEST | Press release
Supports a wide range of users from novices to experts, serving a wide variety of needs Rigaku Corporation, a Group company of Rigaku Holdings Corporation (headquarters: Akishima, Tokyo; CEO: Jun Kawakami; hereinafter “Rigaku”) has launched worldwide sales of STAvesta, a thermal analyzer that simultaneously measures a sample’s weight and change in calorific value during heating. STAvesta responds to needs in a wide array of fields where thermal analysis is required. It is expected to find use in a wide variety of material-analysis applications for the development of advanced features and complex materials. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20250708207135/en/ STAvesta FlatBlank, a Revolutionary Auto-adjustment Feature, Dramatically Reduces Workload In conventional thermal analysis, baseline adjustment must be performed by hand before measurement can begin. This process can be time-consuming and frustrating, particu
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom