MN-DIGI-INTERNATIONAL
21.6.2022 09:02:08 CEST | Business Wire | Press release
Digi International, (NASDAQ: DGII, www.digi.com ), a leading global provider of Internet of Things (IoT) solutions, connectivity products and services, today extended its IoT solution portfolio with the unveiling of its new Digi ConnectCore® MP1 family of system-on-modules (SOMs). The MP1 is the industry’s smallest STM32MP1 SOM that integrates Wi-Fi, Bluetooth and wired connectivity without comprising design flexibility.
This solution is made complete with its Connected Device platform as well as its well-tested development tools and design support. This makes Digi ConnectCore MP1 SOMs a cost-effective wireless solution for original equipment manufacturers (OEMs) seeking to reduce risk and effort in their product development. Ideal Digi ConnectCore MP1 applications include handheld products with cameras and/or displays such as medical devices, environmental test equipment, industrial human machine interfaces, or headless devices such as EV charging stations, renewable-energy controllers and others.
Leveraging both new and market-proven STM32MP1 micro processing units (MPUs) from STMicroelectronics (STM), Digi ConnectCore MP1 SOMs offer more features with a lower total cost of ownership. The form factor is smaller than a postage stamp (29x29 mm), which is ideal for form-factor-challenged applications with low-profile requirements. These off-the-shelf family of Digi ConnectCore MP1 SOMs bring scalability, compatibility and pre-certified wireless connectivity in a solution suitable for a broad range of applications in the healthcare, transportation and industrial sectors.
The unique Digi SMTplus™ surface-mount form factor provides design flexibility by enabling more complex applications through land grid array (LGA) pads and less complex applications using edge-castellated pads. By eliminating the need for connectors, ConnectCore SOMs shrink the bill of materials and offer greater suitability for high-vibration and harsh environment applications where connectors are prohibitive.
Small Form Factor Packed with High-Performance Features
- STM32MP15x, single/dual Cortex-A7 @ 650 MHz
- Cortex-M4 companion processing core for real-time tasks (STM32MP15x only)
- Pre-certified Wi-Fi 5 802.11a/b/g/n/ac + Bluetooth 5.0 (including DLE) option
- Up to 1 GB SLC NAND flash, up to 1 GB DDR3
- Unique ultra-low power and wake-up state management
- Dual 10/100/1000 Ethernet connectivity (single 10/100/1000 Eth for STM32MP15x)
- Fully validated embedded Linux software platform (Digi Embedded Yocto)
- Digi TrustFence® embedded security framework – ready-to-use security features
- Off-the-shelf development board and low-cost gateway reference design
- Industrial reliability and operating temperature with leading hardware warranty
“Digi ConnectCore MP1 SOMs respond to the challenge of building intelligent, connected and secure wireless products in strongly regulated markets such as the healthcare, transportation, and industrial sectors,” said Andreas Burghart, Senior Product Manager with Digi. “Unlike other SOMs, Digi ConnectCore MP1 provides a scalable, highly integrated solution that encompasses a complete set of development tools, design support, software, and security building blocks to accelerate time to market. Digi also provides remote management and security services to simplify deployment and ongoing maintenance throughout the entire product lifecycle.”
For more information, visit https://www.digi.com/ccmp1 .
About Digi International
Digi International (NASDAQ: DGII) is a leading global provider of IoT connectivity products, services, and solutions. It helps companies create next-generation connected products and deploy and manage critical communications infrastructures in demanding environments with high levels of security and reliability. Founded in 1985, Digi has helped customers connect more than 100 million things and counting. For more information, visit www.digi.com .
View source version on businesswire.com: https://www.businesswire.com/news/home/20220621005044/en/
Link:
Social Media:
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Multi-Color Corporation Initiates Implementation of Restructuring Agreement29.1.2026 07:58:00 CET | Press release
Commences Prepackaged Chapter 11 Process As Part of Previously Announced Restructuring Support Agreement to Reset Balance Sheet and Position Company for Long-Term Growth and InvestmentRestructuring Supported by CD&R and More Than Supermajority of Senior Secured Lenders Who Have Agreed to Backstop Nearly $890 Million Investment; Provides More Than $500 Million of New Liquidity Upon EmergenceAll Global Operations and Service to Customers Expected to Continue Without Interruption; All Trade Vendors and Suppliers Expected to be Paid in FullProvides for $250 Million of New Money Debtor-in-Possession Financing to Capitalize the Business Throughout the Prepackaged Chapter 11 Process Multi-Color Corporation (“MCC” or the “Company”), a global leader in prime label solutions, today announced that to implement the previously announced restructuring support agreement (the “RSA”), the Company has commenced its prepackaged Chapter 11 filing in the United States Bankruptcy Court for the District of N
Takeda Reports Third-Quarter FY2025 Results: Updates Full Year Outlook to Reflect VYVANSE® Generics Impact, OPEX Discipline and FX Tailwind; Progressing Toward Three Transformative Launches Ahead29.1.2026 07:37:00 CET | Press release
Year-to-Date Revenue Declined by 2.8% at Constant Exchange Rate (CER), 3.3% atActual Exchange Rates (AER);Impact of VYVANSE® Generics is Tapering OffCore Operating Profit Declined by 3.4% at both CER and AER Year to DateReported Operating Profit Increased by 1.2% at AER Year to Date, Lower Restructuring Expenses More Than Offset Impairment Takeda (TOKYO:4502/NYSE:TAK) today announced earnings results for the third quarter of fiscal year 2025 (nine months ended December 31, 2025). The gap between incremental Growth & Launch Products revenue and VYVANSE erosion is narrowing, and operational efficiencies drove year-on-year reductions in operating expenses, including R&D. The company raised its full-year forecasts based on cost discipline and FX tailwind, while its Revenue Management Guidance has been updated primarily due to the impact of VYVANSE generics. Takeda is positioned for long-term growth and has multiple late-stage programs with multibillion-dollar peak revenue potential. Follow
Galderma Unveils ‘Wake Up To Restylane’, Underscoring Restylane as the Ideal Hyaluronic Acid Treatment for Always-On Natural Beauty29.1.2026 07:00:00 CET | Press release
‘Wake Up To Restylane®’ is a global campaign designed to meet the rising demand for natural-looking always-on results, helping people wake up looking refreshed and rested, and reframes Restylane treatments from a clinical procedure into an always-on beauty regimen Backed by 30 years of science, the Restylane portfolio is the only hyaluronic acid (HA) range offering four distinct technologies, designed to deliver personalized natural-looking outcomes that provide contour, definition, and hydration, with HA closest to the skin’s own1-7 This launch builds on new clinical data presented at the International Master Course on Aging Science (IMCAS) World Congress 2026, confirming Restylane’s proven efficacy and versatility across multiple facial areas and the décolletage8-11 Galderma (SIX: GALD), the pure-play dermatology category leader, has launched ‘Wake Up To Restylane’, a global campaign that showcases Restylane as an everyday beauty ally. Aligned with the growing desire for effortless,
Ubitus Partners with Maizuru City, Kyoto to Launch AI Data Center Project, Advancing the Deployment of a Top-Tier AI GPU Center in Japan29.1.2026 07:00:00 CET | Press release
Ubitus K.K. (Headquarters: Shinjuku, Tokyo; Representative Director & CEO: Wesley Kuo), a global leader in cloud streaming and AI solutions, today announced that it will hold a land signing ceremony and press conference with Maizuru City, Kyoto Prefecture, on January 29, 2026. At the event, Ubitus will officially unveil its comprehensive plan to construct an AI Data Center in Maizuru City, marking the company’s transition into the physical construction phase of its initiative to build a top-tier AI GPU center in Japan. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260128944842/en/ Ubitus will launch its Maizuru City AI Data Center project on January 29, marking the first step toward building a top-tier AI GPU center in Japan. Powered by NVIDIA Blackwell GPUs and NeoCloud, the project strengthens Japan’s AI infrastructure and regional development. This land agreement represents the first major milestone following Ubitus’ sel
Lattice to Showcase Advanced Edge AI Solutions at the FPGA-forum 202628.1.2026 22:00:00 CET | Press release
Lattice Semiconductor (NASDAQ: LSCC), the low power programmable leader, today announced its exhibition plan for the upcoming FPGA-forum 2026 taking place February 11 – 12, 2026 in Trondheim, Norway. As part of the event, Lattice Corporate Vice President of Software Solutions and Applications Engineering Eleena Ong will deliver a keynote presentation exploring how rapidly maturing AI technologies can turn FPGA platforms into innovation canvases for a much broader range of developers, sparking new application possibilities. Lattice will also deliver a technical presentation and host a demo showcase focused on how its low power FPGA solutions are advancing connectivity and edge AI applications. Who: Lattice Semiconductor What / When (GMT+1): Lattice Demo Showcase (Table #3), Feb 11-12 Keynote Feb. 11, 9:30 a.m. “Unlocking the Next Wave of FPGA Innovators with Generative and Agentic AI” Technical Presentation Feb. 12, 10 a.m. “Smaller. Cooler. Smarter: Lattice FPGAs’ Path to Uncompromised
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom