ACCESS Newswire

Gungnir Resources Inc.

15.11.2021 12:01:53 CET | ACCESS Newswire | Press release

Share
Gungnir Drills 6.94% Nickel within 31 Metres Grading 0.93% Nickel Starting 20 Metres Below Surface at Lappvattnet

SURREY, BC / ACCESSWIRE / November 15, 2021 / Gungnir Resources Inc. (TSXV:GUG)(OTC PINK:ASWRF) ("Gungnir" or the "Company") is very pleased to report more near surface, high-grade nickel results at the Company's Lappvattnet nickel deposit in Sweden. Today's results are highlighted by yet another wide, near surface nickel intercept in drill hole LAP21-12. Assays are pending for drill holes LAP21-13, -14 and -15.

Jari Paakki, CEO commented, "The story is just beginning for Gungnir at Lappvattnet where we are having early success expanding nickel mineralization, including both high-grade and wide-grade nickel intercepts, with only 1,300 metres of drilling which tested just a small fraction of the deposit. We have yet to test depth extent, which is largely unexplored, and the remaining 80% of the Lappvattnet deposit along strike to the east where prior drilling decreased considerably. And we have yet to drill a hole into our other Swedish nickel asset, Rormyrberget."

Results Table:

Hole ID

From (m)

To (m)

Length (m)

Ni %

Cu %

Co %

PGEs (g/t)

LAP21-12

20.00

51.00

31.00

0.93

0.13

0.02

0.15

28.00

35.00

7.00

1.24

0.19

0.02

0.18

33.20

33.40

0.20

6.94

0.04

0.11

0.14

43.00

51.00

8.00

0.98

0.13

0.02

0.17

LAP21-11

30.00

36.00

6.00

0.59

0.10

0.01

0.04

33.80

34.25

0.45

1.70

0.03

0.08

0.13

PGEs in grams per tonne (g/t) = platinum (Pt) + palladium (Pd) + gold (Au)
Length is core length in metres

Drilling Details:

The Company's recently completed its initial 2021, 15-hole (1,300 metre) drill program at Lappvattnet. Drilling covered a strike length of 140 metres which represents just 20% of the total strike length of the nickel deposit (sections 7.5E to 11E); please refer to the map in the newly updated corporate presentation on the Company's website. New drilling and assays are expected to be incorporated into future resource upgrades.

Hole LAP21-12 was drilled on Section 7.5E and hole LAP21-11 was drilled on Section 9.5E, both on sub-sections with 20 metre spacings. Hole LAP21-12 hit mineralized peridotite (disseminated and blebby sulphides) starting at a down-hole depth of 20 metres including a narrow massive sulphide section at 33.2 metres. Drill hole LAP21-11 was drilled up-dip of Gungnir's holes LAP21-09 and -10 (resulted reported in news release dated November 10, 2021) and appears to have just skimmed the top of main mineralized zone, but still contained nickel mineralization. Hole LAP21-12 was drilled 80.0 metres at a dip of -65 degrees at location 1,741,495mE and 7,165,151mN and LAP21-11 was drilled 74.60 metres at a dip of -50 degrees at the same set-up as LAP21-09 and -10 at location 1,741,530mE and 7,165,161mN. Co-ordinates above are in Swedish co-ordinate system RT90-2.5, and both holes were drilled at an azimuth of 340 degrees. Once all drill results have been received a complete set of sections will be available on the Company's website. Currently, sections 8E, 9E and 10E are available in the Company's corporate presentation.

Drill core was logged and tagged for sampling at the Company's core logging facility in Lycksele then shipped to ALS Minerals' Core Services Laboratory in Mala. Core was sawed on site in Mala by ALS staff and prepped sample material was sent to ALS's Lab in Ireland. Core was analyzed for multi-elements using code ME-MS41, Cu OG46 analysis for >10000 ppm Cu, NiOG46 analysis for >10000 ppm Ni, and Pt, Pd, and Au were analyzed using fire assay method PGM-ICP27. Blanks and certified standards are routinely included in sample batches for quality assurance and control.

Nickel Resources:

Gungnir's nickel resources in Sweden include Lappvattnet and Rormyrberget. In 2020, the Company updated both resources which collectively total 177 million pounds of nickel (see Technical Report with an effective date of November 17, 2020). The properties are accessible year-round with good transportation and industrial infrastructure including shipping facilities and are located about an hour drive from Boliden's mill complex.

  • Lappvattnet: Inferred Resource of 780,000 tonnes grading 1.35% nickel for 23.1 million lbs (10.5 million kg) of nickel.
  • Rormyrberget: Inferred Resource of 36,800,000 tonnes grading 0.19% nickel for 154 million lbs (70 million kg) of nickel.

The technical information in this news release has been prepared and approved by Jari Paakki, P.Geo., CEO, and a director of the Company. Mr. Paakki is a Qualified Person under National Instrument 43-101.

About Gungnir Resources

Gungnir Resources Inc. is a Canadian-based TSX-V listed mineral exploration company (GUG: TSX-V, ASWRF: OTCPK) with gold and base metal projects in northern Sweden. Gungnir's assets include two nickel-copper-cobalt deposits, Lappvattnet and Rormyrberget, both with updated nickel resources, and the Knaften project which hosts a developing intrusion-hosted gold system, and VMS (zinc-copper) and copper-nickel targets, all of which are open for expansion and further discovery. Further information about the Company and its properties may be found at www.gungnirresources.com or at www.sedar.com.

On behalf of the Board,

Jari Paakki, CEO and Director

For further information contact:

Head Office/Investor Relations
Phone: +1-604-683-0484

Jari Paakki, CEO
Email: jpaakki@eastlink.ca

Chris Robbins, CFO
Email: robbinscr@shaw.ca

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Information

Certain statements in this news release may constitute "forward-looking information" within the meaning of applicable securities laws (also known as forward-looking statements). Forward-looking information involves known and unknown risks, uncertainties and other factors, and may cause actual results, performance or achievements or industry results, to be materially different from any future results, performance or achievements or industry results expressed or implied by such forward-looking information. Forward-looking information generally can be identified by the use of terms and phrases such as "anticipate", "believe", "could", "estimate", "expect", "feel", "intend", "may", "plan", "predict", "project", "subject to", "will", "would", and similar terms and phrases, including references to assumptions. Some of the specific forward-looking information in this news release includes, but is not limited to, statements with respect to: expectations of future resource upgrades and that new drilling and assays will be incorporated into any resource upgrade, and Gungnir's plan for development of its properties and the timing thereof.

Forward-looking information is based on a number of key expectations and assumptions made by Gungnir, including, without limitation: the COVID-19 pandemic impact on the Canadian and global economy and Gungnir's business, and the extent and duration of such impact; no change to laws or regulations that negatively affect Gungnir's business; there will be a demand for Gungnir's services and products in the future; Gungnir will be able to operate its business as planned; and Gungnir's plans for future exploration and development of its properties is reasonable and will be possible within the anticipated timelines. Although the forward-looking information contained in this news release is based upon what Gungnir believes to be reasonable assumptions, it cannot assure investors that actual results will be consistent with such information.

Forward-looking information is provided for the purpose of presenting information about management's current expectations and plans relating to the future and readers are cautioned that such statements may not be appropriate for other purposes. Forward-looking information involves significant risks and uncertainties and should not be read as a guarantee of future performance or results as actual results may differ materially from those expressed or implied in such forward-looking information. Those risks and uncertainties include, among other things, risks related to: no certainty that any economically viable mineral deposit will be located on Gungnir's properties; that Gungnir may not be able to complete its planned drilling and EM geophysics as anticipated; the impacts of the COVID-19 pandemic; ability to access capital markets; environmental matters; changes in legislation or regulations; receipt of required licenses, permits and approvals; and resource estimates may not be accurate and may differ significantly from actual mineral resources. Management believes that the expectations reflected in the forward-looking information contained herein are based upon reasonable assumptions and information currently available; however, management can give no assurance that actual results will be consistent with such forward-looking information. The forward-looking information contained this news release is expressly qualified in its entirety by this cautionary statement. Forward-looking information reflects management's current beliefs and is based on information currently available to Gungnir. The forward-looking information is stated as of the date of this news release and Gungnir assumes no obligation to update or revise such information to reflect new events or circumstances, except as may be required by applicable law.

SOURCE: Gungnir Resources Inc.



View source version on accesswire.com:
https://www.accesswire.com/672736/Gungnir-Drills-694-Nickel-within-31-Metres-Grading-093-Nickel-Starting-20-Metres-Below-Surface-at-Lappvattnet

To view this piece of content from www.accesswire.com, please give your consent at the top of this page.

About ACCESS Newswire

DK

Subscribe to releases from ACCESS Newswire

Subscribe to all the latest releases from ACCESS Newswire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from ACCESS Newswire

Global Scams Remain Widespread: Nearly Two in Three Adults Worldwide Report Scam Encounters, 9% Lost Money19.11.2026 18:01:00 CET | Press release

THE HAGUE, NL / ACCESS Newswire / November 19, 2026 / The Global Anti-Scam Alliance (GASA), in collaboration with Outseer, today released the Global State of Scams 2026 report. Based on a survey of 58,900 adults across 42 markets, the report examines how often people encounter scams, how they respond, and the financial and emotional impact on those affected. In the past 12 months, 64% of adults worldwide encountered a scam and 9% lost money. Shopping, investment, and unexpected money scams were among the types people most often interacted with. In Africa, 21% of adults lost money to a scam, more than double the global rate. The research also highlights the emotional toll of scams. Among people who lost money, 69% reported a significant or moderate impact on their mental wellbeing, 20% reported increased tension at home, and 16% said they could not pay for essentials such as rent or groceries. Among those who did not report the scam to an organization, the most common reason was uncerta

After 20 Years of Modernizing Other Companies' Software, Polcode Turns the Lens on Itself19.11.2026 15:00:00 CET | Press release

WARSAW, PL / ACCESS Newswire / November 19, 2026 / Polcode, a software development company that has helped businesses across North America and Europe modernize their technology since 2006, launched its new website at polcode.com this week. Timed to the company's 20th anniversary, the launch is more than a redesign. It applies the same modernization approach Polcode brings to client systems every day to its own brand. For 20 years, Polcode has been the team businesses call when software stops keeping up with the business: aging platforms, tangled integrations, and tools nobody dares touch. So when it came time to rebuild its own website, the question was fair. Would a company that modernizes for others hold itself to the same standard? The new site is Polcode's answer, serving as both a showcase of what the company does and an example of it. We spend a lot of time helping businesses move beyond systems that no longer reflect where they're headed. At some point, we had to ask ourselves t

Karbon-X (OTCQB:KARX) Enters California's Multi-Billion-Dollar Compliance Carbon Market Following CITSS Approval19.11.2026 13:45:00 CET | Press release

CALGARY, AB / ACCESS Newswire / November 19, 2026 / Karbon-X Corp. (OTCQB:KARX) ("Karbon-X" or the "Company"), a global carbon and environmental markets company, today announced that it has completed registration under the Compliance Instrument Tracking System Service (CITSS), enabling the Company to participate directly in California's regulated compliance carbon market. This milestone elevates Karbon-X's North American trading infrastructure, enabling the Company to directly source, hold, and transact compliance allowances and eligible offset credits, positioning the Company to capture trading margins and recurring commercial opportunities from California's ongoing compliance demand. Unlike voluntary carbon markets, California's Cap-and-Invest Program is backed by state regulation requiring covered entities to surrender eligible compliance instruments against their emissions obligations, creating recurring regulatory demand for allowances and eligible offset credits. California's pro

Leggett Dynamics Wins 2026 Automotive News PACE Pilot Award For Smart Brushless Motor18.11.2026 15:30:00 CET | Press release

DETROIT, MI / ACCESS Newswire / November 18, 2026 / Leggett Dynamics has won a 2026 Automotive News PACE Pilot Award for its Smart Brushless Motor. This next-generation motion system simplifies vehicle integration, improves performance and supports the industry's transition to software-defined vehicles (SDVs). Leggett Dynamics' Smart Brushless Motor streamlines motion-control architecture by operating with or without a seat-level electronic control unit (ECU). The system enables direct communication between the vehicle-level ECU and individual actuators, supporting more centralized and zonal vehicle architectures while reducing packaging size, weight and wiring complexity. It also improves noise, vibration and harshness (NVH), durability, and electromagnetic compatibility (EMC). "As automakers transition to software-defined vehicles, they are looking for solutions that reduce complexity without compromising performance," said Julien Rea, VP of Global Innovation and Engineering at Legge

Proxymity Unveils MiKaDiv Compliance Solution for Issuers Ahead of New German Tax Regime18.11.2026 08:30:00 CET | Press release

FRANKFURT AM MAIN, DE / ACCESS Newswire / November 18, 2026 / Proxymity, the digital investor communications platform, is set to launch its MiKaDiv Compliance Solution as Germany's new dividend reporting regime takes effect in January 2027, giving German issuers a single place to manage their new obligations to the Federal Central Tax Office (BZSt). From 1 January 2027, dividends paid by listed German companies will carry an additional reporting step: the company must pass details of its shareholders to the BZSt. SRD II, transposed into German law under Section 67d of the German Stock Corporation Act, (AktG) took effect in 2020 and gave issuers the right to identify their investors, including foreign investors held through nominee accounts. MiKaDiv now makes it a requirement. The first reports are expected early in the 2027 AGM season, as issuers seek approval for their dividends. Proxymity is the leading provider of shareholder identification to German issuers, handling more than 40%

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye