EDWARDS
4.3.2016 14:46:31 CET | Business Wire | Press release
Edwards has launched a special variant to its XDS range of dry scroll pumps, suitable for use in more aggressive applications. The new XDS-C dry scroll pumps are fitted with a Chemraz® gas ballast non return valve pad and exhaust valve pad, and stainless steel exhaust flange. These new features enable them to be used on applications where the exposed standard fluoroelastomer valve pads may be affected by the media being pumped, and cause rapid deterioration.
This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20160304005224/en/
XDS35iC and XDS45iC dry scroll pumps, with peak speeds of 35 and 40 m3 h-1 respectively, can handle up to 240 grammes per hour of water vapour and are ideal in harsh processes including wet chemistry applications such as rotary evaporation and distillation processes. The simple single sided scroll design allows routine maintenance to be done in minutes for maximum up-time.
“We have seen an increase in demand for scroll pumps which are suitable for more challenging gases and vapour loads. The new XDS-C will ensure we can support our customers in more aggressive applications“, said David Goodwin, Product Manager Edwards. “We have also introduced two new spares kits which can be used in conjunction with a tip seal change kit to allow customers to upgrade existing XDS variants.”
Edwards’ XDS dry scroll pump provides an alternative to oil sealed rotary vane pumps and other dry technologies. It is lubricant free and hermetically sealed so it provides a totally clean and dry vacuum to prevent cross contamination. Unlike other scroll pumps, the bearings in the XDS range are isolated by the bellows, so that any aggressive chemicals involved in the process will not attack them.
The XDS35iC and XDS45iC extend the existing range of nXDS-C dry scroll pumps with pumping speeds from 6 to 40 m3 h-1 .
For more information on Edwards’ products, they will be exhibiting at
Pittcon, Atlanta, USA
6-10 March,
Booth Number 646
Chemraz® is a registered trademark of Greene Tweed.
Further information about Edwards can be found at www.edwardsvacuum.com .
View source version on businesswire.com: http://www.businesswire.com/news/home/20160304005224/en/
Contact:
Edwards
Rebecca Walder
+44 (0) 1293 603103
Rebecca.Walder@edwardsvacuum.com
Link:
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Beacon Acquires Haize Labs to Power AI for the Real Economy17.9.2026 16:30:00 CEST | Press release
Haize Labs leadership will anchor Beacon’s new applied AI research group, accelerating the deployment of AI across the essential businesses Beacon owns Beacon Software (Beacon), the first centralized AI holding company, today announced that it has acquired Haize Labs, an AI reliability company that tests and safeguards AI agents for real-world deployment. The Haize Labs team will join Beacon to form its Applied AI Research Group, with co-founder and CEO Leonard Tang joining as VP of AI Research to lead the AI operating system that is deployed across Beacon’s companies. Beacon believes that the fastest way to bring AI to the traditional economy is through the software businesses that essential industries already use and trust, equipping them with AI infrastructure. Beacon acquires these businesses for long-term growth and connects them to a centralized AI operating system that compounds with each additional acquisition and industry. The addition of the Haize Labs team will strengthen th
TIMELAB Develops OEM/ODM Hair Straightener Reaching 200°C at All Three Measured Points in 15 Seconds17.9.2026 16:00:00 CEST | Press release
Testing at 230 V with a 260°C setting confirmed at least 200°C after 15 seconds at all three measured plate locations (front, center and rear), not just a single point. TIMELAB Co., Ltd., a Japanese beauty-appliance OEM/ODM provider, has developed a hair straightener for OEM/ODM customization for international hair care brands and professional markets. In testing at 230 V with a 260°C setting, all three measured plate locations reached at least 200°C after 15 seconds. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20260914187865/en/ Three-Point Plate Testing A European-market development unit with a maximum setting of 260°C was tested at 230 V. Fifteen seconds after power-on, readings at the front, center and rear were 212.5°C, 227.5°C and 200.0°C, respectively. From around 60 seconds onward, temperature differences among the three points narrowed, indicating a stable trend. Precision Temperature Control An NTC sensor inside t
Earnix Brings Agentic AI to the Decisions That Drive Insurance Performance17.9.2026 15:09:00 CEST | Press release
Agent Hub, part of Earnix AIOS, brings more than 25, insurance-specific agents and apps into Earnix’s governed pricing, underwriting, and customer decision solutions- improving workflows and business performance Earnix today announced the introduction of Agent Hub, a curated catalog of insurance-specific AI agents and apps within Earnix AIOS — the AI Orchestration System powering Earnix’s pricing and rating, underwriting, and customer engagement solutions. Agent Hub brings agentic AI directly into these solutions, enabling more intelligent workflows and strengthening the high-stakes decisions that shape pricing, underwriting, customer engagement, growth, and profitability. In an increasingly turbulent insurance environment, the useful life of an insurance decision is getting shorter. Risk and market conditions are changing faster, making growth, profitability, and portfolio performance harder to manage. AI is increasing the speed and scope of what insurers can analyze, recommend, and i
Medisca Launches Global Peptide Division17.9.2026 15:07:00 CEST | Press release
New division brings API-grade peptides and Medisca’s quality-first pharmaceutical expertise to a rapidly evolving area of personalized medicine Medisca today announced the launch of Medisca Peptides, a dedicated global division focused on expanding access to API-grade peptides and building an integrated peptide platform for pharmaceutical and personalized medicine markets worldwide. As the peptide landscape evolves, Medisca is proactively building the capabilities and infrastructure needed to support API-grade peptides within applicable regulatory frameworks. The launch represents a significant long-term commitment to peptides, including the expansion of Medisca’s portfolio, strategic manufacturing relationships, and the pharmaceutical infrastructure needed to support the category’s growth. It also signals Medisca’s ambition to become a leading force in the next generation of peptide innovation. For Medisca, the opportunity is familiar. More than 35 years ago, the company was founded t
Elliptic Launches Its Decode Agent to Answer On-Chain Risk Questions and Shows Its Work17.9.2026 15:00:00 CEST | Press release
Hours of tracing, answered in seconds, with the evidence attached Elliptic, the global leader in on-chain risk, today launched Decode, an AI agent built on Elliptic’s intelligence platform. The Decode agent answers natural-language questions about cryptoasset addresses and their exposure in seconds, and returns the evidence behind every answer. Compliance and investigations teams need answers to questions nobody planned for. Getting them out of the data is now a specialist skill, so the questions wait for someone who has it, or go unasked. Meanwhile illicit actors move at machine speed, and agents are starting to sit on both sides of a payment. General-purpose AI assistants can produce an answer. They cannot show where it came from. A fluent response with nothing behind it cannot be put in front of a second-line reviewer, an auditor, or a regulator. “The market is full of AI that asks to be trusted. That is not good enough when someone asks how you reached a decision,” said Jackson Hul
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom