DAI-NIPPON-PRINTING
31.8.2021 03:02:06 CEST | Business Wire | Press release
Dai Nippon Printing Co., Ltd. (DNP, TOKYO: 7912) has developed a Reflect Array that flexibly reflects the millimetre waves used in fifth generation (5G) mobile communications systems to expand coverage area.
This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210830005245/en/
Compared to general metal reflectors, the new product is capable of reflecting millimetre waves in a more targeted manner. As a result, there are fewer restrictions on installation, making it possible to improve the communications environment in locations where radio waves have been difficult to reach, such as those in the shadow of buildings. In addition, the new product boasts superior design features allowing it to respond to various installation environment considerations.
Background
The 24GHz and above radio waves used in the high-speed large-capacity communications of 5G are higher frequency milliwaves than those used in 4G, and maintain a larger information capacity. At the same time, they are characterized by strong straightness properties and short reach, leading to radio waves being blocked in areas such as in the shadow of buildings making it difficult to ensure communication quality. Also, when adding base stations and relay equipment to resolve this issue, new challenges emerge, such as large costs and the difficulty of securing installation space.
DNP has once again risen to the challenge, taken advantage of proprietary microfabrication technology, and by applying an original concept has successfully separated the Frequency Selection Reflection Layer that selectively reflects predetermined frequency bands while merely passing through other radio waves, and the Reflective Direction Control Layer, a special dielectric layer that decides the direction of incoming and reflected radio waves, to develop a Reflect Array that makes it easier to control for the characteristics of each layer. The newly developed product is cheaper than installing base stations and relay equipment, and does not require a power source. It can, therefore, be installed in a variety of location, which contributes to significant improvements in the 5G communications environment.
Features
- Can be installed in a variety of locations
Unlike metal reflectors that reflect radio waves directly as in a mirror, the newly developed product is a reflective array capable of the asymmetric reflection of specific frequency radio waves. It is possible to flexibly set the frequency band to be reflected, the incidence angle of the radio waves received from the base station, and the reflection angle to deliver the radio waves, along with the spread of the reflection waves. As a result, it is now possible to effectively deliver radio waves to locations where it was previously difficult to do so. As a power source is no longer needed the new product can also be used in locations where installation space is restricted.
- Effective designs based on original concepts
The new product is comprised of three layers: the Frequency Selective Surface Layer that selectively reflects predetermined frequency bands while merely passing through other radio waves, the Reflective Direction Control Layer that decides the direction of incoming and reflected radio waves, and a Design Cover Layer that not only protects these two layers, but also provides the durability required of construction materials along with high level design features that are conducive to various installation environment considerations.
- Effective improvement of radio wave conditions
We have made it is possible to pre-adjust the spread of the reflection waves in answer to the desire to deliver reflection waves over a broad area, or to gather those waves into specific devices.
- Reduces the impact on existing radio waves
Unlike metal reflectors that reflect all radio waves, the new product passes through all but target radio waves, reducing the impact on existing radio waves.
- Superior design features
It is possible to print various patterns on the surface of the Design Cover Layer, making it possible to add external designs, including interior, exterior and advertising signboards.
Usage Scene
Recently, we have seen more companies and organizations consider the adoption of 5G as a means of targeting the realization of smart cities and smart factories that exploit robots and the Internet of Things (IoT). Commercialization efforts are already underway. With the development of the Reflect Array, we anticipate the following installation instances in cases where the radio wave environment is expected to deteriorate due to obstacles, and aim to link these initiatives to the spread of 5G.
- Improvement of the communication environment behind radio wave shields in smart factories
- Improvement of mobile device usage environment indoors at business offices and educational sites
- Usage at exhibition spaces where layouts change with each event and radio wave shielding conditions alter
- Usage at stadiums and amusement facilities where area-specific information is delivered
- Applications leveraging design elements, such as urban buildings, walls and signboards that require harmony with the surrounding environment
Looking Ahead
DNP will work jointly with various communications-related companies, including communications carriers, to verify the functionality of the new product, aiming for commercialization from FY 2023.
The new product is a Passive type Reflect Array that fixes the reflection direction of the radio waves. We will engage in joint development of an Active type Reflect Array with multiple companies, and this research has been selected as a national project in FY2021.
About DNP
DNP is one of the world’s largest comprehensive printing companies, providing a diverse portfolio of products and services to about 20,000 corporate clients worldwide. Since we were founded in 1876, we have consistently innovated new products and processes, and have successfully integrated proprietary printing and information technologies to branch out into various fields, including packaging, decorative materials, display components, and electronic devices. DNP continues to take on the challenge of new business fields, including those related to the environment, energy, and life sciences. Our aim is to become a principal provider of solutions to a variety of problems by developing and combining new technologies.
View source version on businesswire.com: https://www.businesswire.com/news/home/20210830005245/en/
Link:
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
OCP Announces Date of Third Quarter and Nine-Month 2026 Earnings19.11.2026 17:30:00 CET | Press release
OCP S.A. (“OCP” or the “Company”), a global leader in the fertilizer industry, will release its third quarter and nine-month 2026 results on Monday, November 30, 2026. The results will be available to holders of the Company’s bonds, qualified institutional buyers, securities analysts and market makers on the OCP Intralinks portal from 7:00 a.m. EDT, 12:00 p.m. Morocco and London time (GMT). OCP senior management will host a conference call to discuss third quarter and nine-month 2026 results at 8:00 a.m. EDT, 1:00 p.m. Morocco and London time (GMT) on Monday, November 30, 2026, for holders of the Company’s bonds, qualified institutional buyers, securities analysts and market makers. Eligible parties that have not already registered for access to the Intralinks portal may do so by contacting the Investor Relations Department by emailing g.laraki@ocpgroup.ma. About OCP OCP is a global leader in the fertilizer industry, backed by almost a century’s production history. OCP has exclusive ac
ISACA Launches Updated COBIT 7 With Enhanced Assessment Model and Modern Digital Platform19.11.2026 16:24:00 CET | Press release
Refreshed framework reflects today’s technology landscape with streamlined design guidance, refreshed objectives and three levels of organizational assessment When AI can spark fears about humanity’s future and aging technology can bring air travel to a standstill, the cost of weak governance is impossible to ignore. To help enterprises strengthen the governance of their information and technology, ISACA has launched COBIT 7, an updated version of its globally recognized framework for information and technology (I&T) governance. Built for a rapidly changing digital world, the new COBIT 7 framework combines trusted guidance, an intuitive digital platform, customizable resources, and practical tools to help practitioners turn technology into measurable value, align decisions with strategy and confidently navigate emerging risks, including AI. COBIT 7 reinforces the framework’s longstanding role in helping businesses align their I&T operations with broader strategic goals, manage technolo
North Star Carbon Removal Project Selected by Government of Canada for Landmark Carbon Removal Procurement Program19.11.2026 16:04:00 CET | Press release
Microsoft-backed Saskatchewan project developed by MLTC and Svante among only three BECCS projects selected North Star, a planned large-scale carbon dioxide removal (CDR) project being developed by Meadow Lake Tribal Council (MLTC) and Svante Technologies Inc. (Svante), has been selected by the Government of Canada as a qualified supplier under the federal Request for Standing Offer (RFSO) for the Acquisition and Retirement of Credits from Carbon Dioxide Removal Projects. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261118228180/en/ The proposed North Star bioenergy with carbon capture and storage project is being developed by the Meadow Lake Tribal Council (MLTC) and Svante. The project will generate durable carbon dioxide removal credits by capturing biogenic CO2 from the MLTC Bioenergy Center in Meadow Lake, SK, Canada, and storing it deep underground in a geological storage site. North Star was one of only three bioene
Xsolla Gives Games a New Home for Their Players on Desktop and the Web, With Rewards to Help Bring Players Back19.11.2026 15:32:00 CET | Press release
Developers Can Now Reach Players on Desktop and the Web With Xsolla Player and Xsolla Pages Xsolla (USA), Inc., a global commerce company, is giving game developers two new capabilities designed to reach players and encourage repeat engagement. Xsolla Player and Xsolla Pages are now available, letting developers integrate quests, rewards, and partner-funded offers into the player flow. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261119175727/en/ Graphic: Xsolla Xsolla Player is a desktop app that players install once and access with their Xsolla ID, bringing their game library and inventory together without separate sign-ups for each game. Xsolla Pages creates search-optimized storefronts on the web for every title in a developer’s catalog, with direct checkout. PC studios work hard to win a player's first click, then work just as hard for every session after. Bringing players back is a challenge and has traditionally req
From London 1851 to Riyadh 2030: The United Kingdom Continues Its World Expo Legacy with the Signing of Its Participation Contract for Expo 2030 Riyadh19.11.2026 15:10:00 CET | Press release
The United Kingdom has signed its Participation Contract for Expo 2030 Riyadh, confirming its place at one of the world’s largest global gatherings. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261119617914/en/ The Participation Contract was signed by H.E Adel Al-Jubeir, Minister of State for Foreign Affairs, Climate Envoy, and Commissioner General of Expo 2030 Riyadh; and Lord Sarwar, UK Minister for Trade; and Talal Al-Marri, CEO of Expo 2030 Riyadh. The Agreement constitutes a significant milestone in the United Kingdom’s journey towards Expo 2030 Riyadh, establishing the framework for the execution of its pavilion, programming and visitor experience. This latest agreement adds to a growing number of Participation Contract signings, reflecting increasing momentum behind Expo 2030 Riyadh and the value countries are placing on being part of it. The Participation Contract was signed by H.E Adel Al-Jubeir, Minister of State
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom
