Business Wire

CORFLOW-THERAPEUTICS

Share
CorFlow Announces Positive Data from the MOCA I First in Human Study Presented at EuroPCR 2023

CorFlow Therapeutics AG, a clinical-stage company that has developed the world’s first combined system for diagnostic assessment and therapy delivery to address coronary microvascular obstruction (MVO), has announced the interim positive results of its MOCA I (Microvascular Obstruction with CoFI System Assessment) study at EuroPCR in Paris, France. The first-in-human study aims to evaluate the safety and feasibility of a novel real-time catheter-based system to detect MVO immediately after primary percutaneous coronary intervention (PPCI) and deliver timely therapeutic intracoronary agents. The data set presented in a EuroPCR Late Breaking Trial session included 30 patients with an ST elevation myocardial infarction (STEMI), the most severe type of heart attack.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20230519005005/en/

To view this piece of content from mms.businesswire.com, please give your consent at the top of this page.

CorFlow has developed a next-generation fully-integrated CoFI system, which will be utilized in the upcoming pivotal trial prior to be commercially available. It is an investigational device limited by federal law to investigational use and is not available for commercial distribution yet. (Photo: Business Wire)

The system outputs a novel pressure parameter (PCoFI) for detection of MVO, which was evaluated for correlation with cardiac MRI measured MVO, considered the reference standard. For the patients who had the CoFI diagnostic sequence, the essential results of the study showed that the system provided a sensitivity of 95%, specificity of 91%, and AUC of 0.94 for the ability to detect MVO measured by cardiac MRI. The CoFI device and procedure were deemed safe with no device-related deaths, flow-limiting dissections, or thrombotic events at 30 days, as adjudicated by an independent Clinical Events Committee.

The MOCA I study, presented by Professor Dr. Marco Valgimigli, Deputy Chief of Cardiology at the Cardiocentro Ticino Institute in Lugano, Switzerland, suggests that it may now be possible to have accurate, early detection which can lead to targeted treatment for these high-risk patients. Finally, we may be able to detect MVO with confidence, directly at the end of a primary PCI. This is significant. These are important findings that call for further research with this technology.”

Current interventional cardiology technologies, addressing the larger coronary arteries, have been instrumental in saving patients from death and complications after a heart attack, reducing short term mortality over the last several decades. Yet for many patients, longer term outcomes are still poor despite current standard of care treatment. MVO, which is found to be in more than 50% of heart attack patients, has been shown to be the single most powerful prognostic indicator for negative outcomes for these patients, including heart failure and death. Heart disease remains the leading cause of death worldwide, with more than 85% of these due to heart attacks and strokes. Multiple peer-reviewed studies suggest that addressing these blockages in the coronary microcirculation could reduce this global burden.

“The data presented from the MOCA I study with the CorFlow system is very encouraging for our community of cardiologists, who are increasingly recognizing MVO and microvascular disease as a next frontier to improve outcomes in our field,” stated Dr. Azeem Latib of Montefiore Medical Center, New York City, USA. “This emerging area is in its early days, but we can agree that a significant step forward is made by being able to diagnose these patients in the cath lab. With such a technology, we can imagine that many concomitant therapy options can soon be evaluated, since it is now clear that treating only the larger vessels is not enough.”

“Real-time catheter-based MVO detection can provide healthcare professionals with valuable information about the extent and severity of the heart attack, which can inform immediate treatment decisions to impact patient outcomes," stated Paul Mead, CEO of CorFlow. “The CoFI System can be a game-changer as it is the first of its kind and can potentially revolutionize the field, which is ripe for innovation that makes a difference. The ‘next big thing’ in interventional cardiology should be driven by where the largest positive impact in outcomes can be made, and it is hard to imagine a clearer target in this regard than STEMI patients with MVO, the first indication we pursued. MOCA I shows that we can, and will, do better for these patients.”

About the CorFlow CoFI System

The Controlled Flow Infusion (CoFI) System is designed for diagnostic assessment of the coronary microcirculation in the cath lab, and to be a platform for controlled infusion of physician-specified diagnostic and therapeutic agents into the microcirculation. The CoFI System uses proprietary software algorithms to detect microvascular obstruction (MVO) and potentially other conditions related to microvascular function. The system the company plans to bring to the market is comprised of a next generation console, an advanced proprietary catheter with a pressure sensor wire, and single use infusion cassette. In addition to the primary clinical target addressing heart attack patients, the company intends to pursue other indications in both coronary and broader vascular use cases with the technology which are covered by broad patent families.

About CorFlow

CorFlow Therapeutics AG, a venture-backed company headquartered in Switzerland, is advancing medical technology and cardiology in an area many are calling "the next frontier" to improve clinical outcomes for people with heart attacks and coronary artery disease. Two of the founders of the company are renowned interventional cardiologists, Dr. Rob Schwartz and Dr. Martin Rothman, who discovered acute unmet needs over decades of clinical practive. The company is currently raising its Series B round of funding to pursue its mission to save lives and achieve future milestones. The company is continuing to enroll patients in the ongoing European "MOCA I" clinical trial of the CoFI System and is working toward US study submissions for clinical trials and commercialization of its technology. www.corflowinc.com

The CoFI-System is not approved in the United States of America. It is an investigational device limited by federal law to investigational use and is not available for commercial distribution.

To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.

View source version on businesswire.com: https://www.businesswire.com/news/home/20230519005005/en/

About Business Wire

Business Wire
Business Wire
101 California Street, 20th Floor
CA 94111 San Francisco

http://businesswire.com
DK

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Kioxia Receives IEEE Corporate Innovation Award9.5.2025 09:00:00 CEST | Press release

Kioxia Corporation, a world leader in memory solutions, today announced that it has received the IEEE Corporate Innovation Award from the Institute of Electrical & Electronics Engineers (IEEE), the world’s largest technical professional organization dedicated to advancing technology for the benefit of humanity. This award recognizes Kioxia's outstanding contribution in the field of electrical and electronics engineering through its BiCS FLASH™ technology, a low-cost, high-capacity 3D flash memory innovation. The award ceremony was held on April 24 in Tokyo. The IEEE Corporate Innovation Award is a globally-recognized honor bestowed upon organizations that have developed innovative technologies, products or services that have made a substantial contribution to the advancement of electrical and electronics engineering. Since its inception in 1985, the award has been presented to leading electronics manufacturers and IT companies worldwide, and Kioxia is proud to be the seventh Japanese c

Suzano Reports Record First-Quarter Revenue9.5.2025 02:12:00 CEST | Press release

Suzano, the world’s largest pulp producer, announces its first quarter results for 2025 (1Q25) with record net revenue of R$11.6 billion, up 22% on the same quarter last year (1Q24). The result was driven by the exchange rates, increased pulp sales volumes from the new Ribas do Rio Pardo mill, higher paper volume and prices and the positive contribution from our paperboard mills recently acquired in the U.S. The record revenues occurred despite a series of planned downtimes in the quarter, including production lines of the Três Lagoas Unit, Mucuri Unit, and Aracruz Unit, and the Ribas do Rio Pardo Unit’s first scheduled maintenance downtime. Sales exceeded 3 million tonnes in the quarter, a rise of 12% compared to 1Q24, comprising 2.7 million tonnes of pulp and 390 thousand tonnes of paper, up 10% and 25%, respectively, on the same quarter last year. Adjusted EBITDA totaled R$4.9 billion, a 7% increase over 1Q24. Operating cash generation totaled R$2.6 billion, rising 5% on 1Q24. Net p

Andersen Consulting udvider platformen i Asien og Stillehavsområdet med tilføjelsen af Sertis8.5.2025 23:13:00 CEST | Pressemeddelelse

Andersen Consulting udvider sin dækning i Thailand og Indonesien med sin nyeste medlemsvirksomhed, Sertis, et førende konsulentfirma, der leverer datadrevne AI-løsninger til virksomheder i og uden for Sydøstasien. Dette strategiske skridt styrker Andersen Consultings tilstedeværelse i regionen og styrker organisationens kompetencer inden for AI-området. Sertis blev grundlagt i 2014 af Tee Vachiramon og har specialiseret sig i konsulenttjenester inden for AI og teknologitransformation, herunder udvikling af AI-strategi, tilpassede AI-løsninger, dataanalyse og digital omstilling. Firmaet arbejder med kunder i forskellige sektorer, herunder finans, detailhandel, energi, sundhedspleje og produktion, og sætter dem i stand til at optimere driften, træffe bedre beslutninger og forbedre kundeoplevelsen. "At blive medlem af Andersen Consulting er en milepæl for vores firma, da det giver os mulighed for at trække på en enestående platform med brancheførende løsninger til vores kunder," siger Tee

GC Aesthetics® Strengthens Board of Directors with Strategic Appointments8.5.2025 17:10:00 CEST | Press release

GC Aesthetics® (GCA), a privately-held medical technology company providing aesthetic and reconstruction solutions for global healthcare markets is pleased to announce the appointment of Mr. Luigi Ferrari as Chairman of the Board (non-executive) and Mr. Patrick Lee as Board Director, reinforcing the company’s strategic direction and long-term growth plans. These appointments follow the renewed phase of partnership initiated in early 2024 with Hayfin Capital Management, a longstanding investor in GCA. This collaboration has brought fresh momentum to the company’s commitment to innovation, safety, and global expansion in aesthetic and reconstructive breast surgery. Luigi Ferrari, a seasoned executive and investor with a proven track record in the healthcare sector, brings deep leadership experience, commercial growth expertise and industry insight. From 2012 to 2022 he was CEO of Lima Corporate, a global medical device company in the joint replacement market, acquired then by Enovis Corp

PPG to invest $380 million to buildnew U.S. manufacturing facility in Shelby, N.C. for aerospace coatings and sealants8.5.2025 16:30:00 CEST | Press release

PPG (NYSE: PPG) today announced that it will invest $380 million to build a new aerospace coatings and sealants manufacturing facility in Shelby, N.C. Construction on the 62-acre site, which will initially include manufacturing and warehousing units, is set to commence in October 2025 and is expected to be completed in the first half of 2027. The 198,000-square-foot facility will enable the company to continue meeting the growing demands of the aerospace industry. It will employ more than 110 people and produce the full line of PPG’s aerospace coatings and sealants. The additional capacity of this new plant, combined with nearby transport links that improve supply chain and shipping logistics, will help improve service levels for customers. “PPG’s investment in this new manufacturing facility demonstrates the significant demand growth for our world-class technologies and our continued commitment to serving our aerospace customers,” said Tim Knavish, PPG chairman and chief executive off

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye