ACCESS Newswire

CO2 Gro Inc.

9.8.2021 14:32:34 CEST | ACCESS Newswire | Press release

Share
CO2 GRO Inc. Announces another Commercial Feasibility with a Significant Canadian Cannabis Licensed Producer

TORONTO, ON / ACCESSWIRE / August 9, 2021 / Toronto based CO2 GRO Inc. ("GROW") (TSXV:GROW)(OTCQB:BLONF)(Frankfurt:4021) is pleased to announce the commencement of a CO2 Delivery Solutions™ commercial feasibility at a significant Canadian Cannabis Licensed Producer ("the LP").

The feasibility will run for up to one year with an option to expand a commercial installation for the entire production area of the facility at the conclusion of the feasibility or sooner. The objectives of the feasibility are to increase production and revenue while reducing the cost per gram of Cannabis produced at the facility.

The LP currently employs atmospheric CO2 enrichment year-round through purchased CO2 bulk tanks. However, during the warmer months from spring through fall, the facility requires heat venting which makes increasing CO2 levels in the grow areas above ambient conditions very difficult. By employing CO2 Delivery Solutions™, more CO2 can be delivered to the plant despite heat venting, resulting in not only increased plants yields but also a significant reduction in CO2 gas use and the facility's ecological footprint.

Aaron Archibald VP, Sales and Strategic Alliances commented, "The LP is focused on reducing their ecological footprint as well as increasing production and profitability. Our CO2 Delivery Solutions™ technology's ability to deliver significant improvements in yields, reduced cycle times and suppression of pathogens is well documented and increasingly well known in the Canadian Cannabis industry. We have long maintained our CO2 Delivery Solutions™ technology can produce significant reductions in CO2 use and expenses in addition to reducing the ecological footprint of a grower. We look forward to a successful feasibility and hopefully a commercial installation in the near future."

Visit www.co2delivery.ca for more information on CO2 Delivery Solutions™ or  watch this video. To see a CO2 Delivery Solutions™ VCO2 system installation,  watch this video.   

About CO2 GRO Inc.

GROW's proprietary CO2 Delivery Solutions™ technology is revolutionizing the global 600 billion square foot protected agriculture industry (Cuesta Roble 2018). We create a saturated CO2 solution that when misted onto plants provides growers that cannot gas with CO2 the opportunity to increase plant yields by up to 30% and profits by up to 100%. Applying saturated CO2 also suppressed the development of pathogens such as E.coli and powdery mildew, helping to reduce crop losses. GROW's CO2 Delivery Solutions™ is protected by a suite of patents and patents pending.

The worldwide market for GROW's disruptive CO2 Delivery Solutions™ technology is the 50 billion square feet of greenhouses and 550 billion square feet of protected agriculture facilities (Cuesta Roble 2018). Grower's can maximize revenue and profits with our systems' low fixed and variable costs and ease of systems installation.

GROW's management is rapidly expanding its international marketing partner relationships into the EU, the UK, Mexico, South Africa, the Middle East, South East Asia and Latin America as well as in its North American base.

GROW is committed to good Environment, Social and Governance (ES&G) policy and practices. We are an equal opportunity employer of choice and opportunity.

Our mission is to accelerate the growth of all value plants safely, economically, naturally and sustainably using our patented advanced CO2 Delivery Solutions™ while accreting value to our customers, stakeholders and shareholders.

Forward-Looking Statements

This press release contains statements which constitute "forward‐looking information" within the meaning of applicable securities laws, including statements regarding the plans, intentions, beliefs and current expectations of the Company with respect to future business activities. Forward‐ looking information is often identified by the words "may," "would," "could," "should," "will," "intend," "plan," "anticipate," "believe," "estimate," "expect" or similar expressions and include information regarding: statements regarding the future direction of the Company; the ability of the Company to successfully achieve its business and financial objectives; plans for expansion and the ability of the Company to obtain, develop and foster its business relationships; and expectations for other economic, business, and/or competitive factors. Investors are cautioned that forward‐looking information is not based on historical facts but instead reflect the Company's management's expectations, estimates or projections concerning the business of the Company's future results or events based on the opinions, assumptions and estimates that management considered reasonable at the date the statements are made. Such assumptions include but are not limited to: general business and economic conditions; the Company's ability to successfully execute its plans and intentions; the availability of financing on reasonable terms; the Company's ability to attract and retain skilled staff; market competition; the products and technology offered by the Company's competitors; and that good relationships with business partners will be maintained. Although the Company believes that the expectations reflected in such forward‐looking information are reasonable, such information involves risks and uncertainties, and undue reliance should not be placed on such information, as unknown or unpredictable factors could have material adverse effects on future results, performance or achievements. Among the key factors that could cause actual results to differ materially from those projected in the forward‐looking information are the following: changes in general economic, business and political conditions, including changes in the financial markets; in particular, in the ability of the Company to raise debt and equity capital in the amounts and at the costs that it expects; adverse changes in applicable laws or adverse changes in the application or enforcement of current laws; the biotechnology industry and the greenhouse growers market are highly competitive, and technical advances in the industry will impact the success of the Company, and other risks described in the Company's filings that are available at www.sedar.com. Should one or more of these risks or uncertainties materialize, or should assumptions underlying the forward‐looking information prove incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed, estimated or expected. Although the Company has attempted to identify important risks, uncertainties and factors which could cause actual results to differ materially, there may be others that cause results not to be as anticipated, estimated or intended. The Company does not intend, and does not assume any obligation, to update this forward‐looking information except as otherwise required by applicable law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

For more information, please visit www.co2gro.ca or contact Michael O'Connor, Manager, Investor Relations at 604-317-6197 or michael.oconnor@co2gro.ca

SOURCE: CO2 Gro Inc.



View source version on accesswire.com:
https://www.accesswire.com/658865/CO2-GRO-Inc-Announces-another-Commercial-Feasibility-with-a-Significant-Canadian-Cannabis-Licensed-Producer

To view this piece of content from www.accesswire.com, please give your consent at the top of this page.

About ACCESS Newswire

DK

Subscribe to releases from ACCESS Newswire

Subscribe to all the latest releases from ACCESS Newswire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from ACCESS Newswire

Surmodics Launches MetalPro(TM) Direct-to-Metal Hydrophilic Coatings for Medical Devices30.10.2026 14:37:00 CET | Press release

HORSHAM, PA / ACCESS Newswire / October 30, 2026 / Surmodics Inc., a leading provider of surface technologies and performance coatings for the medical device industry, today announced at the opening of the Transcatheter Cardiovascular Therapeutics (TCT) conference in San Diego the launch of MetalPro™ direct-to-metal UV cure hydrophilic coatings engineered to bond directly to metal surfaces without primers or tie-layers. By eliminating additional tie-layers, MetalPro simplifies coating applications, reduces process complexity and has the potential to lower overall coating costs. The direct-to-metal approach also provides manufacturers with greater design flexibility, particularly for complex catheter systems where coating thickness and mechanical performance are important considerations. "Medical device engineers are continually challenged to improve device performance while simplifying manufacturing and managing costs," said Bob Hergenrother, PhD, Vice President of R&D and Innovation a

Chervon Launches Advanced Momentum Program (AMP) to Hire & Develop the Next Generation of Leaders30.10.2026 14:00:00 CET | Press release

NAPERVILLE, IL / ACCESS Newswire / October 30, 2026 / Chervon launches Advanced Momentum Program (AMP), reporting to Matt DeFeo, Senior Vice President, Sales, Training, and Recruiting. Chervon will be hiring hundreds of college graduates in the months and years ahead to deliver the company's aggressive growth strategy. The new AMP initiative was developed to catalyze Chervon's recruiting, training, development, promoting, and mentoring of the very best high-potential college grads. AMP will develop the next generation of Chervon leaders. The program features a comprehensive product, skills, and career development training system. AMP will recruit, develop and promote high-potential new hires into a broad range of positions including store coverage, end-user marketing, sales, product management, e-commerce/digital marketing, channel management, commercialization, service, engineering, supply chain, operations, and finance. Ultimately AMP will produce a stream of outstanding senior execu

Aehr Test Systems Appoints Former Meta Infrastructure Executive Vijay Rao to Board of Directors29.10.2026 12:30:00 CET | Press release

FREMONT, CA / ACCESS Newswire / October 29, 2026 / Aehr Test Systems (NASDAQ:AEHR), a leading provider of test and burn-in solutions for semiconductor devices used in artificial intelligence (AI), silicon photonics, data center, automotive, and industrial applications, today announced the appointment of Vijay Rao to its Board of Directors, effective October 28, 2026. Rao brings 30 years of technology industry experience, including more than 13 years at Meta, where he most recently served as Vice President of Infrastructure. His experience spans infrastructure strategy, AI computing, and semiconductor technologies in hyperscale, enterprise, and startup environments. "Vijay brings deep expertise in infrastructure requirements of hyperscale data centers, including the integration of AI accelerators, high-performance memory, and optical networking," said Gayn Erickson, President and Chief Executive Officer of Aehr Test Systems. "He understands firsthand how semiconductor quality and reliab

U.S. Polo Assn. Executes Early on Europe's Digital Product Passport Mandate29.10.2026 12:00:00 CET | Press release

WEST PALM BEACH, FL / ACCESS Newswire / October 29, 2026 / U.S. Polo Assn.®, the official sports brand of the United States Polo Association (USPA), with a multi-billion-dollar global footprint and distribution in more than 190 countries through some 1,200 U.S. Polo Assn. mono-brand retail stores, numerous branded websites and thousands of other points of distribution worldwide, today announced the brand's early activation of Digital Product Passports (DPPs) across product categories sold into the European Union (EU). As Europe prepares to launch the Digital Product Passport Registry, U.S. Polo Assn. has taken a proactive approach by preparing to deploy DPPs across all products sold into the EU well ahead of the mandatory compliance deadline expected in 2028 or 2029. The global sports brand has already mapped product information for millions of products, creating a scalable framework that will enhance product transparency and support compliance readiness throughout its European operati

LiberNovo Previews Treat Yourself Halloween Flash Sale Across Europe29.10.2026 08:40:00 CET | Press release

HONG KONG, HK / ACCESS Newswire / October 29, 2026 / LiberNovo is bringing Halloween treats to the desk with its Treat Yourself Halloween Flash Sale, opening October 29 across the European Union and United Kingdom. The event pairs savings of up to 40% on selected Maxis and LiberNovo Omni Pro configurations with limited seasonal gifts for qualifying early shoppers. Spooky extras for your desk Limited Halloween-themed gift packs are available to the first 300 eligible customers in the European Union and the first 100 in the United Kingdom, on a first-come, first-served basis while supplies last. Gift contents, qualifying purchases and availability follow the terms on each regional campaign page. More room for Big and Tall users Maxis is designed around larger frames, with a wider seat and 52 cm seat depth for greater thigh support and room to shift naturally. Maxis Manual provides adjustment by hand. Maxis Electric adds motorised lumbar adjustment and OmniStretch guided back stretching.

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye