Business Wire

CELLTRION-HEALTHCARE

27.7.2020 13:40:10 CEST | Business Wire | Press release

Share
European Commission grants marketing authorisation for world’s first subcutaneous formulation of infliximab, Remsima® SC, for an additional five indications including for use in inflammatory bowel disease and ankylosing spondylitis

Celltrion Healthcare today announced that the European Commission (EC) has granted marketing authorisation for Remsima® (infliximab, CT-P13) subcutaneous (SC) formulation for the treatment of adult patients with ankylosing spondylitis, Crohn’s disease, ulcerative colitis, psoriatic arthritis and psoriasis.1

The approval follows a positive opinion issued by the Committee for Medicinal Products for Human Use (CHMP) of the European Medicines Agency (EMA) in June and is based on data from a pivotal study comparing the pharmacokinetics, efficacy and safety of the SC and intravenous (IV) formulations of Remsima® in people with active Crohn’s disease and ulcerative colitis, throughout a 1-year treatment period.2,3 Based on the results of the pivotal study, a 120 mg fixed dose of Remsima® SC has been approved for use in the European Union (EU), in adults regardless of body weight, in both existing and newly added indications.

Professor Stefan Schreiber, Director of the Clinic for Internal Medicine at Kiel Campus of the University Hospital Schleswig-Holstein in Germany said: “The subcutaneous formulation of Remsima® (Remsima® SC) has been shown to have very high efficacy, and favourable data, which are fully comparable to the efficacy and safety profile of the IV formulation. Today’s approval marks an important progress for the gastroenterology community as it means that treatment can now be administered in significantly less time, thereby providing patients more flexibility and control over how they receive their treatment.”

“We are pleased to announce this important regulatory milestone earlier than we expected, with the European Commission prioritising review of this important new administration option. We will accelerate the launch process on a country-by-country basis in order to expand treatment options for patients with chronic inflammatory diseases such as inflammatory bowel disease and ankylosing spondylitis,” said Hyoung-Ki Kim, Vice Chairman at Celltrion Healthcare. “We will do our best to make Remsima® SC available as early as possible and hope this medication will contribute to minimising the risks involved with administering medical treatments during the COVID-19 pandemic.”

Celltrion anticipates receiving approval of Remsima® SC in 97 countries, including 31 countries in Europe.

-- ENDS --

Notes to Editors:

About Remsima® (CT-P13) intravenous (IV) formulation1
Remsima® IV is usually given as 3 mg per kg/body weight in rheumatoid arthritis (RA) and as 5 mg per kg/body weight for the other indications. Infliximab IV is given as an infusion over two hours. All patients are monitored for any reactions during the infusion and for at least one to two hours afterwards.

About Remsima® CT-P13 subcutaneous (SC) formulation4,5
A 120 mg fixed dose of Remsima® SC has been granted marketing authorisation in the EU, in adults regardless of body weight, in all previously approved indications for the IV formulation. Remsima® SC has three administration options; via a pre-filled pen (auto injector), pre-filled syringe or pre-filled syringe with needle safeguard. The SC formulation has the potential to enhance treatment options for the use of infliximab biosimilar by providing high consistency in drug exposure and a convenient method of administration.

About CT-P13 (biosimilar infliximab)
CT-P13 is developed and manufactured by Celltrion, Inc. and was the world’s first monoclonal antibody biosimilar approved by the European Commission (EC). It is indicated for the treatment of eight autoimmune diseases including RA and IBD. It was approved by the EC under the trade name Remsima® in September 2013 and launched in major EU countries in early 2015. The US FDA approved CT-P13 in April 2016 under the trade name Inflectra® . CT-P13 is approved in more than 94 countries (as of July 2020) including the US, Canada, Japan and throughout Europe.

About Celltrion Healthcare
Celltrion Healthcare is committed to delivering innovative and affordable medications to promote patients’ access to advanced therapies. Its products are manufactured at state-of-the-art mammalian cell culture facilities, designed and built to comply with the US FDA cGMP and the EU GMP guidelines. Celltrion Healthcare endeavours to offer high-quality cost-effective solutions through an extensive global network that spans more than 110 different countries. For more information please visit: https://www.celltrionhealthcare.com/en-us

Forward-looking statement disclaimer
Certain information set forth in this press release contains statements related to our future business and financial performance, and future events or developments involving Celltrion Healthcare, that may constitute forward-looking statements, under pertinent securities laws.

These statements may be identified by words such as “will”, “has potential to”, “brings”, “if approved”, “would”, “could”, “opportunity”, “hope”, “is considering” the negative of these words or such other variations thereon or comparable terminology.

In addition, our representatives may make oral forward-looking statements. Such statements are based on the current expectations and certain assumptions of Celltrion Healthcare's management, of which many are beyond its control.

Forward-looking statements are provided to allow potential investors the opportunity to understand management’s beliefs and opinions in respect of the future so that they may use such beliefs and opinions as one factor in evaluating an investment. These statements are not guarantees of future performance and undue reliance should not be placed on them.

Such forward-looking statements necessarily involve known and unknown risks and uncertainties, which may cause actual performance and financial results in future periods to differ materially from any projections of future performance or result expressed or implied by such forward-looking statements.

Although forward-looking statements contained in this presentation are based upon what management of Celltrion Healthcare believes are reasonable assumptions, there can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Celltrion Healthcare undertakes no obligation to update forward-looking statements if circumstances or management’s estimates or opinions should change except as required by applicable securities laws. The reader is cautioned not to place undue reliance on forward-looking statements.

References

1 European Medicines Agency Summary of Product Characteristics (SmPC). Remsima.

2 Reinisch W, et al. A novel formulation of CT-P13 (infliximab biosimilar) for subcutaneous administration: 1-year result from a Phase 1 open-label randomised controlled trial in patients with active Crohn’s disease. European Crohn’s and Colitis Organisation 2019. Abstract no: A-1103.

3 Ben-Horin S, et al. A novel subcutaneous infliximab (CT-P13): 1-year results including switching results from intravenous infliximab (CT-P13) in patients with active Crohn’s disease and ulcerative colitis. Oral presentation (OP24). Presented at ECCO 2020.

4 Yoo DH, Jaworski J, Matyska-Piekarska E et al. A Novel Formulation of CT-P13 (infliximab biosimilar) for subcutaneous administration: One-year results from part one of a Phase I/III randomised controlled trial in patients with rheumatoid arthritis. Poster (FRI0128). Presented at EULAR 2019.

5 Westhovens R, Wiland P, Zawadzki M et al. A novel formulation of CT-P13 (infliximab biosimilar) for subcutaneous administration: 30-week results from part two of a Phase I/III randomised controlled trial in patients with rheumatoid arthritis. Poster (SAT0170). Presented at EULAR 2019.

Link:

ClickThru

About Business Wire

Business Wire
Business Wire
101 California Street, 20th Floor
CA 94111 San Francisco

http://businesswire.com

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Lattice to Showcase AI-Driven Low Power FPGA Innovation at FPGA Horizons Conference29.9.2026 22:00:00 CEST | Press release

Lattice Semiconductor (NASDAQ: LSCC), the low power programmable and platform firmware leader, today announced its participation in the upcoming FPGA Horizons conference, taking place on October 6 – 7, 2026 in London. As part of the conference’s technical program, Lattice will deliver a Tech Talk presentation and a hands-on workshop, and host a demo showcase focused on how its low power FPGA solutions are advancing AI at the edge. Who: Lattice Semiconductor What / When (GMT+2): Oct. 6, 2026 Demo showcase including Lattice Holoscan Sensor Bridge solution and Lattice Prompt™ AI-driven FPGA design tool Tech Talk (10:10 – 10:30 a.m.), Shaw Theater: Practical Security Fundamentals for FPGA Engineers Oct. 7, 2026 Workshop (1:30 – 4:40 p.m.), Hyde Park room Lattice Nexus™-based FPGA hands-on Lattice Prompt™ agentic AI workflow Where: FPGA Horizons Conference, Pullman London St Pancras, Euston Road, London NW1 FPGA Horizons is a UK-based conference for FPGA industry specialists. Supporting Res

NetApp Delivers Secure, Zero-Copy Data Activation for the Agentic Enterprise29.9.2026 19:30:00 CEST | Press release

Enterprises will be empowered to accelerate AI innovation to machine speed NetApp® (NASDAQ: NTAP), the Intelligent Data Infrastructure company, today announced new capabilities that enable enterprises to accelerate their adoption of agentic AI with secure, in-place, zero-copy data activation. The heterogeneous metadata capability of NetApp AI Data Engine (AIDE) helps organizations discover, understand, govern, and operationalize data where it lives, while an expanded integration with Commvault connects the NetApp Platform with Commvault recovery orchestration workflow to help customers detect attacks earlier and recover cleaner data faster. As AI agents move from experimentation into production, enterprise data infrastructure has become a critical business dependency. Agents can read, retrieve, and act on data at machine speed, but most enterprise data estates were built for human-paced workflows: fragmented across file, object, cloud, on-premises, and sovereign environments; governed

NetApp to Expand Partnership with SAP to Support SAP Cloud Infrastructure29.9.2026 19:30:00 CEST | Press release

NetApp to explore integrating NetApp capabilities with SAP Cloud Infrastructure storage architecture, to support secure, resilient, high-performance infrastructure for SAP and customer workloads NetApp, the intelligent Data Infrastructure company, today announced its intent to expand its long-standing partnership with SAP, with plans to explore deeper cloud-native integration of NetApp capabilities into SAP Cloud Infrastructure, SAP’s Infrastructure-as-a-Service platform. The NetApp Platform supports key elements of the SAP Cloud Infrastructure storage architecture, delivering reliable, highly available and high-performance file and block storage services. The NetApp Platform also provides built-in proactive data protection capabilities and data replication to support SAP’s global availability model. “SAP and NetApp share a long-standing commitment to empower the world’s most mission-critical enterprise environments,” said Álvaro Celis, Senior Vice President, Chief Commercial, Partner

NetApp Removes Storage Bottleneck for AI Factories29.9.2026 19:30:00 CEST | Press release

New architecture delivers fastest storage on the planet, designed to maximize GPU utilization and architected for up to 100 TB per second aggregate throughput NetApp® (NASDAQ: NTAP), the Intelligent Data Infrastructure company, today announced NetApp Novus™, the fastest storage on the planet designed for AI infrastructure providers operating large GPU environments. Built to support a zettabyte-scale file system, this next-generation architecture will allow AI factories to keep millions of GPUs continuously fed with data, maximizing the efficiency, utilization, and profitability of their investments. Neoclouds and GPU-as-a-Service providers are building AI factories at a scale that traditional storage architectures were never designed to support, creating bottlenecks that reduce GPU utilization and increase infrastructure costs. Under traditional architectures, GPU utilization can drop below 30 percent when AI factories cannot feed enough data to their GPUs to generate the results they

NetApp Empowers Enterprises to Build Anything, Anywhere29.9.2026 19:30:00 CEST | Press release

New hybrid multi-cloud capabilities remove borders between on-premises and cloud operations NetApp® (NASDAQ: NTAP), the Intelligent Data Infrastructure company, today announced new hybrid multi-cloud capabilities with autonomous controls to maximize enterprise flexibility and efficiency for any workload. Enterprises can now more easily adopt modern data strategies across on-premises and cloud environments leveraging new capabilities for consistent operations that account for sovereignty, governance, and controlled consumption. As enterprise applications and AI workloads increasingly span on-premises environments, public clouds, sovereign regions, and emerging AI Factory architectures, organizations need more than infrastructure flexibility. They need a consistent operating model that can keep pace with machine-speed demand while meeting requirements for governance, resilience, efficiency, and jurisdictional control. Traditional manual administration, fragmented tooling, and disconnecte

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye