VIROMED-MEDICAL-AG
Viromed Medical AG (ISIN: DE000A3MQR65; "Viromed") is launching a second pioneering study on the use of cold plasma for the prevention of ventilator-associated pneumonia (VAP). The study, under the scientific direction of Prof. Dr. Hortense Slevogt from the Hannover Medical School (MHH) and two other world-renowned institutes, aims to obtain rapid special approval for the PulmoPlas device developed by Viromed for this innovative preventive measure in Germany and the USA.
The further development and standardization of cold plasma technology for use in study-relevant cell cultures and later also in the human lung comes from relyon plasma GmbH, a wholly owned subsidiary of TDK Electronics AG. As a partner of Viromed, relyon plasma will establish the prototypes for the application and ensure the standardized generation of cold plasma as well as its characterization and consistency in the trial.
The exploitation rights are held by Viromed Medical AG.
VAP is a frequent and serious complication in mechanically ventilated patients. It occurs in patients who are invasively mechanically ventilated for at least 48 hours. Studies show that VAP occurs in 23 to 36 percent of mechanically ventilated patients and is associated with prolonged ventilation time and longer stays in the intensive care unit and hospital. The estimated mortality rate is 10 to 13 percent. In Germany alone, there were around 486,000 mechanically ventilated intensive care patients in 2023 and many thousands of deaths, with a strong upward trend. Many millions of patients worldwide are mechanically ventilated every year. The use of cold plasma against VAP would therefore have the potential to save hundreds of thousands of lives every year.
Uwe Perbandt, CEO of Viromed Medical AG: "The use of cold plasma has already proven very successful in the treatment of difficult-to-heal wounds. Our vision is to use the antimicrobial effect in other areas of application where treatment with conventional methods leads to unsatisfactory results. If several hundred thousand patients die from VAP every year, this is unacceptable. As a first mover, we are therefore systematically driving forward the relevant research and striving to obtain special approval for our PulmoPlas device as quickly as possible, as we see an urgent medical need for a better solution to the VAP problem. At the same time, we are tapping into an attractive market segment, as the global market for mechanical ventilation is predicted to see solid growth averaging 8.2% per year until 2032 due to the increase in chronic respiratory diseases."
Since October 2023, the MHH, in cooperation with Viromed Medical AG, has been investigating the safety profile of the use of cold plasma in bacterial infections of the respiratory tract using models of the respiratory mucosa. In particular, the focus is on the potential of cold plasma to kill bacteria that have infected the epithelium. In parallel, possibly associated inflammatory reactions, possible changes in cell differentiation, cell death, DNA damage as well as the therapeutic dose and the time window of application are being investigated. In order to optimize the effectiveness of different plasma compositions, their effectiveness in connection with cell damage will be investigated differentially. Due to promising preliminary results that have shown no damaging effect on the airway epithelium, a second study is now starting in parallel, which was originally planned for mid-2025. This will expand the investigation of the safety profile of cold plasma on alveolar epithelium, taking into account mechanical shear forces that act on the alveolar mucosa during breathing. In addition, the potential and safety of cold plasma to kill bacteria applied to precision-cut lung slices (PCLS) will be tested.
Prof. Dr. Hortense Slevogt, Clinic for Pneumology and Infectiology, MHH: "Ventilator-associated pneumonia not only has a high mortality rate, it is also a general burden on the healthcare system due to increased antibiotic consumption, longer patient stays and higher treatment costs. The increasing antibiotic resistance of pathogens also makes new, non-antibiotic approaches urgently necessary. If the positive preliminary results of our study continue to be confirmed and the safety of cold physical plasma in the human lung is established, cold plasma has the potential to revolutionize the treatment of ventilated patients."
About Viromed Medical AG:
Viromed Medical AG has a broad customer base in the DACH region, including various DAX companies, e.g. Volkswagen and Lufthansa, as well as federal states and various federal ministries, 1,100 hospitals, 7,000 pharmacies, and 17,000 medical practices.
Language: | English | |
Company: | Viromed Medical AG | |
Flensburger Straße 18 | ||
25421 Pinneberg | ||
Germany | ||
Phone: | +49 4101 809960 | |
E-mail: | kontakt@viromed-medical.de | |
Internet: | https://www.viromed-medical-ag.de/ | |
ISIN: | DE000A3MQR65 | |
WKN: | A3MQR6 | |
Listed: | Regulated Unofficial Market in Berlin, Dusseldorf, Hamburg | |
EQS News ID: | 1942511 |
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20240709060458/en/
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Kioxia Receives IEEE Corporate Innovation Award9.5.2025 09:00:00 CEST | Press release
Kioxia Corporation, a world leader in memory solutions, today announced that it has received the IEEE Corporate Innovation Award from the Institute of Electrical & Electronics Engineers (IEEE), the world’s largest technical professional organization dedicated to advancing technology for the benefit of humanity. This award recognizes Kioxia's outstanding contribution in the field of electrical and electronics engineering through its BiCS FLASH™ technology, a low-cost, high-capacity 3D flash memory innovation. The award ceremony was held on April 24 in Tokyo. The IEEE Corporate Innovation Award is a globally-recognized honor bestowed upon organizations that have developed innovative technologies, products or services that have made a substantial contribution to the advancement of electrical and electronics engineering. Since its inception in 1985, the award has been presented to leading electronics manufacturers and IT companies worldwide, and Kioxia is proud to be the seventh Japanese c
Suzano Reports Record First-Quarter Revenue9.5.2025 02:12:00 CEST | Press release
Suzano, the world’s largest pulp producer, announces its first quarter results for 2025 (1Q25) with record net revenue of R$11.6 billion, up 22% on the same quarter last year (1Q24). The result was driven by the exchange rates, increased pulp sales volumes from the new Ribas do Rio Pardo mill, higher paper volume and prices and the positive contribution from our paperboard mills recently acquired in the U.S. The record revenues occurred despite a series of planned downtimes in the quarter, including production lines of the Três Lagoas Unit, Mucuri Unit, and Aracruz Unit, and the Ribas do Rio Pardo Unit’s first scheduled maintenance downtime. Sales exceeded 3 million tonnes in the quarter, a rise of 12% compared to 1Q24, comprising 2.7 million tonnes of pulp and 390 thousand tonnes of paper, up 10% and 25%, respectively, on the same quarter last year. Adjusted EBITDA totaled R$4.9 billion, a 7% increase over 1Q24. Operating cash generation totaled R$2.6 billion, rising 5% on 1Q24. Net p
Andersen Consulting udvider platformen i Asien og Stillehavsområdet med tilføjelsen af Sertis8.5.2025 23:13:00 CEST | Pressemeddelelse
Andersen Consulting udvider sin dækning i Thailand og Indonesien med sin nyeste medlemsvirksomhed, Sertis, et førende konsulentfirma, der leverer datadrevne AI-løsninger til virksomheder i og uden for Sydøstasien. Dette strategiske skridt styrker Andersen Consultings tilstedeværelse i regionen og styrker organisationens kompetencer inden for AI-området. Sertis blev grundlagt i 2014 af Tee Vachiramon og har specialiseret sig i konsulenttjenester inden for AI og teknologitransformation, herunder udvikling af AI-strategi, tilpassede AI-løsninger, dataanalyse og digital omstilling. Firmaet arbejder med kunder i forskellige sektorer, herunder finans, detailhandel, energi, sundhedspleje og produktion, og sætter dem i stand til at optimere driften, træffe bedre beslutninger og forbedre kundeoplevelsen. "At blive medlem af Andersen Consulting er en milepæl for vores firma, da det giver os mulighed for at trække på en enestående platform med brancheførende løsninger til vores kunder," siger Tee
GC Aesthetics® Strengthens Board of Directors with Strategic Appointments8.5.2025 17:10:00 CEST | Press release
GC Aesthetics® (GCA), a privately-held medical technology company providing aesthetic and reconstruction solutions for global healthcare markets is pleased to announce the appointment of Mr. Luigi Ferrari as Chairman of the Board (non-executive) and Mr. Patrick Lee as Board Director, reinforcing the company’s strategic direction and long-term growth plans. These appointments follow the renewed phase of partnership initiated in early 2024 with Hayfin Capital Management, a longstanding investor in GCA. This collaboration has brought fresh momentum to the company’s commitment to innovation, safety, and global expansion in aesthetic and reconstructive breast surgery. Luigi Ferrari, a seasoned executive and investor with a proven track record in the healthcare sector, brings deep leadership experience, commercial growth expertise and industry insight. From 2012 to 2022 he was CEO of Lima Corporate, a global medical device company in the joint replacement market, acquired then by Enovis Corp
PPG to invest $380 million to buildnew U.S. manufacturing facility in Shelby, N.C. for aerospace coatings and sealants8.5.2025 16:30:00 CEST | Press release
PPG (NYSE: PPG) today announced that it will invest $380 million to build a new aerospace coatings and sealants manufacturing facility in Shelby, N.C. Construction on the 62-acre site, which will initially include manufacturing and warehousing units, is set to commence in October 2025 and is expected to be completed in the first half of 2027. The 198,000-square-foot facility will enable the company to continue meeting the growing demands of the aerospace industry. It will employ more than 110 people and produce the full line of PPG’s aerospace coatings and sealants. The additional capacity of this new plant, combined with nearby transport links that improve supply chain and shipping logistics, will help improve service levels for customers. “PPG’s investment in this new manufacturing facility demonstrates the significant demand growth for our world-class technologies and our continued commitment to serving our aerospace customers,” said Tim Knavish, PPG chairman and chief executive off
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom