General Atomics
25.4.2024 01:08:32 CEST | ACCESS Newswire | Press release
SAN DIEGO, CA / ACCESSWIRE / April 24, 2024 / General Atomics Aeronautical Systems, Inc. (GA-ASI) has been selected to build production representative flight test articles of the Collaborative Combat Aircraft (CCA) for the U.S. Air Force Life Cycle Management Center's (AFLCMC) Advanced Aircraft Division. This option contract award by the Advanced Aircraft Division exercises the critical design, build, and flight test on the existing CCA contract with GA-ASI following an initial six-month phase that culminated in a successful CCA preliminary design review (PDR) earlier this year.
To view this piece of content from cdn.nwe.io, please give your consent at the top of this page.The CCA program aims to be a force multiplier, developing a low-cost, modular, unmanned aircraft equipped with advanced sensors or weapons and operating in collaborative teams with the next generation of manned combat aircraft.
In February 2024, GA-ASI successfully conducted the maiden flight of the XQ-67A CCA prototype aircraft validating the "genus/species" concept pioneered by the Air Force Research Laboratory (AFRL) as part of the Low-Cost Attritable Aircraft Platform Sharing (LCAAPS) program. This program focused on building several aircraft variants from a common core chassis. Since then, this prototype for CCA has successfully completed two additional test flights, laying the groundwork for a successful production and flight test program. GA-ASI's CCA production representative design is based upon the XQ-67A Off-Board Sensing Station developed by GA-ASI for the AFRL.
"The CCA program redefines the future of aviation and will shape the USAF acquisition model to deliver affordable combat mass to the warfighter at the speed of relevancy," said Mike Atwood, Vice President of Advanced Programs for GA-ASI.
"Throughout our 30-year history, GA-ASI has been at the forefront of rapidly advancing unmanned aircraft systems that support our warfighters," said GA-ASI President David R. Alexander. "The USAF is moving forward with GA-ASI due to our focused commitment to unmanned air-to-air combat operations and unmatched UAS experience, ensuring the production of the CCA aircraft at scale to deliver affordable combat mass for the warfighter."
To complement the CCA contract, GA-ASI will continue to conduct a series of autonomy and mission system tests on the MQ-20 Avenger® UAS and XQ-67A to accelerate the readiness of operational autonomy. These live flight tests will continue to demonstrate the readiness of the full mission capability to support the emerging U.S. Air Force Autonomous Collaborative Platforms (ACP).
About GA-ASI
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a leading designer and manufacturer of proven, reliable RPA systems, radars, and electro-optic and related mission systems, including the Predator® RPA series and the Lynx® Multi-mode Radar. With more than eight million flight hours, GA-ASI provides long-endurance, mission-capable aircraft with integrated sensor and data link systems required to deliver persistent situational awareness. The company also produces a variety of sensor control/image analysis software, offers pilot training and support services, and develops meta-material antennas.
For more information, visit www.ga-asi.com.
Avenger, Lynx, Predator, SeaGuardian, and SkyGuardian are registered trademarks of General Atomics Aeronautical Systems, Inc.
Contact Information:
GA-ASI Media Relations
asi-mediarelations@ga-asi.com
+1 (858) 524-8101
SOURCE: General Atomics Aeronautical Systems, Inc.
To view this piece of content from stats.nwe.io, please give your consent at the top of this page.View the original press release on newswire.com.
To view this piece of content from www.accesswire.com, please give your consent at the top of this page.About ACCESS Newswire
Subscribe to releases from ACCESS Newswire
Subscribe to all the latest releases from ACCESS Newswire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from ACCESS Newswire
Fermi Selects CBRE to Operate and Maintain Its First Data Center24.9.2026 22:01:00 CEST | Press release
DALLAS, TX / ACCESS Newswire / September 24, 2026 / Fermi Inc. (NASDAQ:FRMI)(LSE:FRMI), operating as Fermi America™ ("Fermi" or the "Company"), announced today that its subsidiary, Fermi Services LLC, has signed a management agreement with CBRE, the world's largest commercial real estate services firm and provider of critical infrastructure services. CBRE will be the exclusive operations and maintenance provider for building one, Fermi's first data center in the Texas Panhandle. It runs five years from the day building one is first ready for service, and Fermi can renew it in five-year terms. "We're locking in proven partners early to make our operations and construction activities as safe and efficient as possible," said Lee McIntire, Fermi Chief Executive Officer. "CBRE runs some of the most demanding data center environments in the world. Bringing them in now means that when building one is ready for service, the people, the programs, and the procedures to run it are already in plac
LiberNovo Opens Business & Bulk Ordering Ahead of Its Fall Prime Sale24.9.2026 06:50:00 CEST | Press release
HONG KONG, HK / ACCESS Newswire / September 24, 2026 / LiberNovo has opened its Business & Bulk Orders section ahead of the Fall Prime Sale, which runs at eu.libernovo.com and uk.libernovo.com. Team ordering goes live on 23 September, and seasonal sale pricing opens 30 September, with a flash sale on selected products on 6-7 October. Discounts reach up to 39% off, and every order is covered by 30-Day Price Protection. Ordering for a team, not a desk Business & Bulk Orders is live from today, covering orders of five chairs or more across the Omni and Maxis series - chairs alone or paired with a footrest - with tiered pricing at five to ten units and again at eleven or more. Discount rates and how they combine with the rest of the sale are set out on each regional page. The timing follows how companies buy: budgets close in the autumn, workstations get specified for the year ahead, and wellbeing programmes are agreed before January. Why October October is National Ergonomics Month. Hybri
OMP and PwC Alliance Moves Process Manufacturers from Siloed Supply Chain Planning to Unified Decisions23.9.2026 14:25:00 CEST | Press release
ANTWERPEN, BE / ACCESS Newswire / September 23, 2026 / OMP and PwC have formed an alliance to bring unified, faster supply chain decisions to process manufacturers in life sciences, consumer goods, and chemicals. Planning in these industries runs on campaign production, long lead times, and regulatory requirements, all surfacing "too late to act on" when planning sits in separate systems. The alliance combines Unison Planning™, OMP's AI-enabled planning platform with built-in industry expertise, and PwC's implementation services. German specialty pharmaceutical company medac is already live under the alliance, with its planners working on a single demand plan in Unison Planning™. PwC and medac will present the project on October 15, 2026, at the OMP Conference in Singapore, detailing the approach behind the rollout and what it means for planning in pharma. Combining innovation, industry knowledge, and integration OMP and PwC run each implementation as a single program. OMP brings Uniso
SmartVendor Brings Autonomous Retail to the Czech Parliament; Clears Europe's Toughest Privacy Bar with SHEKEL WeightAI(TM)23.9.2026 11:20:00 CEST | Press release
PRAGUE, CZ / ACCESS Newswire / September 23, 2026 / SmartVendor today announced the deployment of an autonomous, AI-powered retail solution inside the Chamber of Deputies of the Parliament of the Czech Republic, built on the WeightAI™ platform from SHEKEL Scales Ltd., the weight-based AI technology and solution provider behind the next generation of autonomous retail. For public institutions across Europe, autonomous retail has presented a compliance contradiction: the technology that makes unattended stores work typically relies on cameras, and cameras mean GDPR risk. The Czech Parliament resolved that contradiction by choosing a solution built on WeightAI™. No cameras. No biometrics. No personal data captured at the point of purchase. Full GDPR compliance by design. The installation, deployed by SmartVendor on the Innovendi Elite platform, marks one of the first deployments of an autonomous AI-powered retail solution inside a major state institution in the Czech Republic. Members of
Fermi and TensorWave Agree to Extend Closing Date to October 31, 202622.9.2026 22:01:00 CEST | Press release
DALLAS, TX / ACCESS Newswire / September 22, 2026 / Fermi Inc. (NASDAQ:FRMI)(LSE:FRMI), operating as Fermi America™ ("Fermi" or the "Company"), today announced that its wholly owned subsidiary, Fermi Campus 1 LLC, and TensorWave TEX1, LLC ("TensorWave") have signed a First Amendment to their Data Center Lease and Services Agreement (the "Lease"). The amendment extends the closing date under the Lease from September 30, 2026 to October 31, 2026. All other terms of the Lease remain unchanged and in effect. The Lease covers 222 megawatts (MW) of total facility power at Fermi's Project Matador campus and represents approximately $6.5 billion in expected total revenue over its initial 15-year term. Parties Working Constructively Toward Closing The Lease, signed in August 2026, provides that its effectiveness is subject to the satisfaction or waiver of specified closing conditions. Those conditions include executing and delivering related work letters and guaranties; finalizing operations sc
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom
