Business Wire

MUNDIPHARMA

16.4.2024 11:01:35 CEST | Business Wire | Press release

Share
Mundipharma and Vectura announce plans to reformulate flutiform® (fluticasone propionate/formoterol fumarate) pressurised metered-dose inhaler (pMDI) as a commitment to reducing the product’s carbon footprint

Mundipharma and Vectura will now progress development of the reformulation of flutiform® (fluticasone propionate/formoterol fumarate) following long-term collaboration, planning and lab-scale development work. The reformulation will ultimately ensure a comparable effective product for patients and further reduce its impact on the environment.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240416962162/en/

The product is an established pressurised metered-dose inhaler (pMDI) for the treatment of asthma, where the use of a combination product is appropriate, and has been available on the market for more than a decade.3

It currently uses the approved apaflurane hydrofluoroalkane 227 (HFA-227), a type of fluorinated greenhouse gas, as its propellant.3 European Union regulation on these types of gases aims to reduce their use, and therefore their emissions, by two-thirds by 2030.1

Work is already under way to source an alternative to the HFA-227 gas used in fluticasone propionate/formoterol fumarate pMDI. This new collaboration will revitalise the efforts to identify and switch to a more environmentally friendly propellant. If successful, this will result in a significantly lower impact on global warming and alignment with European Union regulation on fluorinated greenhouse gases.1

With more than 262 million people living with asthma globally, the reformulation of some asthma treatments to reduce carbon emissions could have a significant impact on the global carbon footprint.4,5

“We are dedicated to positively influencing the life of asthma patients across the globe. This is the first step in our long-term plan to develop a near-zero-emissions asthma inhaler. We are determined to achieve this before the European Union ban of HFA (hydrofluoroalkane) gases comes into effect, and our collaboration with Vectura demonstrates this, as well as our aim to an overall commitment to sustainable healthcare innovation,” said Yuri Martina, Chief Development and Medical Officer at Mundipharma.

“At Vectura, our priority is to ensure that patients prescribed fluticasone propionate/formoterol fumarate pMDI can continue to have access to this treatment. Using Vectura’s expertise and extensive track record in the development of inhaled prescription medicines and devices, we believe the collaboration with Mundipharma will enable us to meet our environmental responsibilities and enable patients to use fluticasone propionate/formoterol fumarate pMDI in the years to come,” said Geraldine Venthoye, Chief Scientific Officer, Vectura.

®: FLUTIFORM is a registered trademark of Jagotec AG used under licence by Mundipharma.

References

  1. Regulation (EU) No 517/2014 of the European Parliament and of the Council of 16 April 2014 on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006 Text with EEA relevance. Available at: https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=uriserv:OJ.L_.2014.150.01.0195.01.ENG (last accessed March 2024)
  2. flutiform® pMDI emissions manufacturing data, Q4 2022 – Q4 2023. Data on file.
  3. flutiform® Summary of Product Characteristics (SmPC). Last updated 13 April 2022. https://www.emcpi.com/pi/26954. (last accessed April 2024).
  4. Global burden of 369 diseases and injuries in 204 countries and territories, 1990–2019: a systematic analysis for the Global Burden of Disease Study 2019. Lancet. 2020;396(10258):1204-22
  5. NHS England, World Asthma Day: tackling climate change and improving respiratory care. Available at https://www.england.nhs.uk/blog/world-asthma-day-tackling-climate-change-and-improving-respiratory-care/ (last accessed March 2024)

*ENDS*

Job code: SciA-FLU-2400001| Date of preparation: April 2024

 

Notes to Editors

About flutiform® (fluticasone propionate/formoterol fumarate):

flutiform® is an inhaler (a pressurised metered-dose inhalation, suspension) which contains two active ingredients, fluticasone propionate and formoterol fumarate dihydrate.3 This fixed-dose combination of fluticasone propionate and formoterol fumarate (flutiform®) is indicated in the regular treatment of asthma where the use of a combination product (an inhaled corticosteroid and a long-acting β₂ agonist) is appropriate for the management of asthma symptoms.3

About Mundipharma:

Mundipharma is a global healthcare company with a presence across Africa, Asia Pacific, Canada, Europe, Latin America and the Middle East.

Mundipharma is dedicated to bringing innovative treatments to patients in the areas of respiratory, pain management, infectious disease as well as other severe and debilitating disease areas. Our guiding principles, centred around Integrity and Patient-Centricity, are at the heart of everything we do. For more information visit www.mundipharma.com.

About Vectura:

Vectura is a specialist inhalation contract development and manufacturing organization (CDMO) that provides inhaled drug development solutions to help customers bring their medicines to patients. With 25 years’ experience, it provides a combination of formulation science, device technology, and inhaled development expertise. Vectura is a member of the Vectura Fertin Pharma group of companies. For more information visit www.vectura.com

To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.

View source version on businesswire.com: https://www.businesswire.com/news/home/20240416962162/en/

About Business Wire

Business Wire
Business Wire
101 California Street, 20th Floor
CA 94111 San Francisco

http://businesswire.com
DK

Subscribe to releases from Business Wire

Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from Business Wire

Lattice and NXP Deliver Flexible, Secure Computing Solution for the Industrial Edge10.11.2026 22:00:00 CET | Press release

Lattice Semiconductor (NASDAQ: LSCC), the low power programmable and platform firmware leader, today announced the Lattice NXP PCIe® Companion solution, jointly enabled and promoted with NXP® Semiconductors. Pairing NXP’s i.MX 95 applications processor with Lattice Nexus™-based FPGAs over PCIe, the solution addresses the real-time connectivity, deterministic I/O, and security challenges in industrial automation, robotics, and intelligent edge applications. The joint solution is available in Lattice CertusPro™-NX or Lattice Certus™-NX configurations as companion chips to NXP i.MX 95 SoC compute processors, deepening a long-standing collaboration between Lattice and NXP spanning industrial, data center, and networking applications. The Lattice FPGA adds low latency, deterministic I/O alongside the NXP applications processor, delivering combined capabilities across real-time processing, AI, and custom I/O to help customers modernize aging designs for new interface standards. It supports e

FDA Approves PIMJETMI® (pimicotinib) for Patients with Tenosynovial Giant Cell Tumor10.11.2026 19:14:00 CET | Press release

PIMJETMI is a new once-daily oral systemic treatment option for certain U.S. patients with symptomatic tenosynovial giant cell tumor (TGCT)In the Phase 3 MANEUVER trial, PIMJETMI demonstrated early1 and durable2 tumor response with clinically meaningful improvements in all clinical outcome assessments, including physical function and painPIMJETMI has shown high objective response rate (ORR) with a manageable safety profileNot intended for Canada-, UK- or US-based media Merck, a leading science and technology company, announced today that the U.S. Food and Drug Administration (FDA) has approved PIMJETMI® (pimicotinib), a once-daily oral colony stimulating factor-1 receptor (CSF-1R) inhibitor, as a systemic treatment for adults with symptomatic tenosynovial giant cell tumor (TGCT) for which surgical resection may cause worsening functional limitation or severe morbidity. “People living with TGCT have long faced difficult treatment decisions as they navigate a disease that can significant

Smartsheet Integrates With Claude Sheets, Making It Easy to Start Projects in Claude and Launch Workflows Across Teams with Smartsheet10.11.2026 18:57:00 CET | Press release

New Send to Smartsheet feature moves work started in Claude into Smartsheet, where the Execution Graph connects it to the people, plans and goals that see it through Smartsheet, the AI-powered enterprise work management platform, today announced a new integration with Claude Sheets, the new spreadsheet artifact in Claude from Anthropic, now in beta. With the new Send to Smartsheet feature, people who build a tracker or plan in Claude can move it into Smartsheet in a few clicks. There they can put it to work with their team, connected to the plans, projects, people and systems their organization already runs on. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261110763156/en/ With the new Send to Smartsheet feature, people who build a tracker or plan in Claude can move it into Smartsheet in a few clicks. More and more work now begins in a conversation with Claude, and the Smartsheet MCP connector for Claude puts the entire pow

InterSystems Joins Google Cloud as Launch Partner for Gemini for Healthcare10.11.2026 18:00:00 CET | Press release

Integration with InterSystems IRIS FHIR MCP will help healthcare organizations securely connect Gemini to trusted, standards-based health data InterSystems, a creative data technology provider powering more than one billion health records globally, today announced that it will serve as a launch partner for Google Cloud’s Gemini for healthcare. Through the collaboration, Gemini for healthcare will connect to the InterSystems IRIS FHIR Model Context Protocol (MCP) server, enabling healthcare organizations to give AI assistants and agents governed access to FHIR data. The integration will bring together Google Cloud’s Gemini capabilities and the standards-based data access provided by InterSystems IRIS FHIR MCP. InterSystems FHIR MCP serves the open Model Context Protocol directly from a FHIR endpoint, allowing MCP-enabled clients to discover and use FHIR tools for searching, reading, creating, updating, and managing healthcare data. “Healthcare organizations are looking for practical way

Coherent Solutions Launches AKTIV, a Dedicated Fitness and Wellness Technology Business Unit10.11.2026 16:34:00 CET | Press release

Coherent Solutions officially launches AKTIV, a dedicated business unit focused exclusively on fitness and wellness technology. AKTIV brings together over 15 years of fitness industry experience, dedicated leadership, and global engineering capabilities to help fitness and wellness operators and equipment manufacturers compete through technology. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20261110242555/en/ Coherent Solutions officially launches AKTIV “We know the fitness and wellness industry and the challenges operators and manufacturers face. With AKTIV, we spend less time defining what needs to be built and more time delivering solutions that improve operations, member experiences, and business performance,” said Vadim Bartlov, Managing Director of AKTIV. AKTIV builds on Coherent Solutions' established work with leading fitness companies, including Life Time, Planet Fitness, Anytime Fitness, Orangetheory, and BowFlex,

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye