IPSEN
Regulatory News:
Ipsen (Euronext: IPN; ADR: IPSEY) announced today that the CONTACT-01 study did not meet its primary endpoint of overall survival (OS) at the final analysis. CONTACT-01 is a phase III clinical trial evaluating Cabometyx® (cabozantinib) in combination with atezolizumab (Tecentriq®) versus docetaxel in patients with unmutated metastatic non-small cell lung cancer (NSCLC) who experienced disease progression on or after treatment with an immune checkpoint inhibitor and platinum-containing chemotherapy.
Howard Mayer, M.D., Executive Vice President, Head of Research and Development at Ipsen, said: “The results from the CONTACT-01 clinical trial have shown the challenge of treating NSCLC patients after prior lines of treatment have failed. While the findings of the study have not met the primary endpoint in this setting, we remain confident in the clinical efficacy of cabozantinib alone and in combination with another treatment in existing indications in difficult-to-treat tumor types. We wish to thank the patients, their families and healthcare teams for their participation in this clinical trial.”
The safety profile of the combination of cabozantinib and atezolizumab observed in the trial was consistent with the known safety profiles for each single agent, and no new safety signals were identified. Detailed findings from CONTACT-01 will be submitted for presentation at a future medical meeting.
ENDS
About CONTACT-01
CONTACT-01 is a global, multicenter, randomized, phase 3, open-label study that enrolled 366 patients who were randomized 1:1 to the experimental arm of cabozantinib in combination with atezolizumab and the control arm of docetaxel. The study enrolled patients with both squamous and non-squamous NSCLC who progressed during or following anti-PD-1/PD-L1 therapy administered either concurrently or sequentially with chemotherapy. The primary endpoint of the trial was overall survival. Secondary endpoints included progression-free survival, objective response rate and duration of response. Results from cohort 7 of the phase 1b COSMIC-021 trial informed the CONTACT-01 trial design. CONTACT-01 was sponsored by Roche and co-funded by Exelixis. Both Ipsen and Takeda Pharmaceutical Company Limited (Takeda) opted in to participate in the trial and are contributing to the funding for this study under the terms of the companies’ respective collaboration agreements with Exelixis. More information about the trial is available at ClinicalTrials.gov.
About CABOMETYX® (cabozantinib)
Cabometyx is a multi-targeted tyrosine kinase inhibitor (TKI) with targets including vascular endothelial growth factor receptor (VEGFR), c-MET and the TAM receptor family, which block the growth of cancer.
Exelixis granted Ipsen exclusive rights for the commercialization and further clinical development of Cabometyx outside of the U.S. and Japan. Exelixis granted exclusive rights to Takeda for the commercialization and further clinical development of Cabometyx for all future indications in Japan. Exelixis holds the exclusive rights to develop and commercialize Cabometyx in the U.S.
In over 60 countries outside of the United States and Japan, including in the European Union (E.U.), Cabometyx is currently indicated as:
-
Monotherapy for advanced renal cell carcinoma:
- as first-line treatment of adult patients with intermediate or poor risk
- in adults following prior vascular endothelial growth factor (VEGF)-targeted therapy
- In combination with nivolumab for the first-line treatment of advanced renal cell carcinoma in adults
- Monotherapy for the treatment of adult patients with locally advanced or metastatic differentiated thyroid carcinoma (DTC), refractory or not eligible to radioactive iodine (RAI) who have progressed during or after prior systemic therapy
- Monotherapy for the treatment of hepatocellular carcinoma (HCC) in adults who have previously been treated with sorafenib.
About Ipsen
Ipsen is a global, mid-sized biopharmaceutical company focused on transformative medicines in Oncology, Rare Disease and Neuroscience. With Specialty Care sales of €2.6bn in FY 2021, Ipsen sells medicines in over 100 countries. Alongside its external-innovation strategy, the Company’s research and development efforts are focused on its innovative and differentiated technological platforms located in the heart of leading biotechnological and life-science hubs: Paris-Saclay, France; Oxford, U.K.; Cambridge, U.S.; Shanghai, China. Ipsen has around 5,000 colleagues worldwide and is listed in Paris (Euronext: IPN) and in the U.S. through a Sponsored Level I American Depositary Receipt program (ADR: IPSEY). For more information, visit ipsen.com
Ipsen’s Forward-Looking Statements
The forward-looking statements, objectives and targets contained herein are based on Ipsen’s management strategy, current views and assumptions. Such statements involve known and unknown risks and uncertainties that may cause actual results, performance or events to differ materially from those anticipated herein. All of the above risks could affect Ipsen’s future ability to achieve its financial targets, which were set assuming reasonable macroeconomic conditions based on the information available today. Use of the words ‘believes’, ‘anticipates’ and ‘expects’ and similar expressions are intended to identify forward-looking statements, including Ipsen’s expectations regarding future events, including regulatory filings and determinations. Moreover, the targets described in this document were prepared without taking into account external growth assumptions and potential future acquisitions, which may alter these parameters. These objectives are based on data and assumptions regarded as reasonable by Ipsen. These targets depend on conditions or facts likely to happen in the future, and not exclusively on historical data. Actual results may depart significantly from these targets given the occurrence of certain risks and uncertainties, notably the fact that a promising medicine in early development phase or clinical trial may end up never being launched on the market or reaching its commercial targets, notably for regulatory or competition reasons. Ipsen must face or might face competition from generic medicine that might translate into a loss of market share. Furthermore, the research and development process involves several stages each of which involves the substantial risk that Ipsen may fail to achieve its objectives and be forced to abandon its efforts with regards to a medicine in which it has invested significant sums. Therefore, Ipsen cannot be certain that favorable results obtained during preclinical trials will be confirmed subsequently during clinical trials, or that the results of clinical trials will be sufficient to demonstrate the safe and effective nature of the medicine concerned. There can be no guarantees a medicine will receive the necessary regulatory approvals or that the medicine will prove to be commercially successful. If underlying assumptions prove inaccurate or risks or uncertainties materialize, actual results may differ materially from those set forth in the forward-looking statements. Other risks and uncertainties include but are not limited to, general industry conditions and competition; general economic factors, including interest rate and currency exchange rate fluctuations; the impact of pharmaceutical industry regulation and healthcare legislation; global trends toward healthcare cost containment; technological advances, new medicine and patents attained by competitors; challenges inherent in new-medicine development, including obtaining regulatory approval; Ipsen's ability to accurately predict future market conditions; manufacturing difficulties or delays; financial instability of international economies and sovereign risk; dependence on the effectiveness of Ipsen’s patents and other protections for innovative medicines; and the exposure to litigation, including patent litigation, and/or regulatory actions. Ipsen also depends on third parties to develop and market some of its medicines which could potentially generate substantial royalties; these partners could behave in such ways which could cause damage to Ipsen’s activities and financial results. Ipsen cannot be certain that its partners will fulfil their obligations. It might be unable to obtain any benefit from those agreements. A default by any of Ipsen’s partners could generate lower revenues than expected. Such situations could have a negative impact on Ipsen’s business, financial position or performance. Ipsen expressly disclaims any obligation or undertaking to update or revise any forward-looking statements, targets or estimates contained in this press release to reflect any change in events, conditions, assumptions or circumstances on which any such statements are based, unless so required by applicable law. Ipsen’s business is subject to the risk factors outlined in its registration documents filed with the French Autorité des Marchés Financiers. The risks and uncertainties set out are not exhaustive and the reader is advised to refer to Ipsen’s 2021 Universal Registration Document, available on ipsen.com
To view this piece of content from cts.businesswire.com, please give your consent at the top of this page.
View source version on businesswire.com: https://www.businesswire.com/news/home/20221208005640/en/
About Business Wire
Subscribe to releases from Business Wire
Subscribe to all the latest releases from Business Wire by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Business Wire
Murata Unveils World’s First 15nF/1.25kV C0G MLCC in 1210-inch Size2.12.2025 03:00:00 CET | Press release
Murata Manufacturing Co., Ltd. (TOKYO: 6981) (ISIN: JP3914400001) announces the launch and mass production of its multilayer ceramic capacitor (MLCC) featuring a capacitance of 15nF, a rated voltage of 1.25kV, and C0G characteristics in the compact 1210-inch (3.2mm x 2.5mm) size. This product delivers highly efficient power conversion and stable performance under high-voltage conditions, making it suitable for onboard chargers (OBCs) in electric vehicles (EVs) and power supply circuits in high-performance consumer devices. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20251201104421/en/ [Murata Manufacturing Co., Ltd.] 15nF/1.25kV/C0G MLCC in 1210-inch Size Resonant and snubber circuits are essential for efficient power conversion and suppressing current and voltage peaks. In both circuits, repeated exposure to high voltage and high current can cause even slight changes in component performance, leading to efficiency loss or
With 40% of Agentic AI Projects Predicted to Fail, Leading Software Developer Says Compliance Is the One Place Where Agentic AI Will Thrive2.12.2025 01:01:00 CET | Press release
Ideagen's CEO explains why binary outcomes and high stakes make compliance ideal for autonomous AI The CEO of one of the world’s leading global compliance software developers, Ideagen, has today (December 2, 2025) said compliance represents the one domain where autonomous AI will succeed – despite technology insights company Gartner® warning "… over 40% of agentic AI projects will be canceled by the end of 2027”. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20251201511477/en/ Ben Dorks, Ideagen CEO Speaking at the launch of their own agentic AI platform Ideagen Mazlan, Ben Dorks said: “Autonomous AI will succeed in compliance because failure is measurable, stakes are high and outcomes are binary. “AI that continuously monitors jurisdictional or industry specific compliance frameworks, detects patterns across thousands of records, raises actions for others to follow, flags gaps before audits, autonomously? That's agentic. It
VeriSilicon’s NPU IP VIP9000NanoOi-FS has Achieved ISO 26262 ASIL B Certification2.12.2025 01:00:00 CET | Press release
Extending the company’s functional safety IP portfolio to NPU IP VeriSilicon (688521.SH) today announced that its NPU IP VIP9000NanoOi-FS has successfully achieved ISO 26262 ASIL B certification, marking a significant milestone in the functional safety capabilities of the company’s neural network processing unit portfolio. This IP features an architecture streamlined for seamless SoC integration, delivering high-quality inference with low power consumption and a compact silicon footprint. The certificate was issued by SGS-TÜV Saar, an international testing, inspection and certification institution. As part of VeriSilicon’s VIP9000 series, the VIP9000NanoOi-FS IP is designed for automotive and edge AI applications, providing high-performance neural network processing with a safety-compliant architecture. The IP supports a wide range of AI inferencing models including Large Language Models (LLMs) and Convolutional Neural Networks (CNNs), with hardware-accelerated AI inference, enabling r
UMA Launches from Europe to Shape the Global Future of Physical AI1.12.2025 23:52:00 CET | Press release
UMA (Universal Mechanical Assistant), a new robotics intelligence company founded by former leaders from Tesla, Google DeepMind, Nvidia and Hugging Face, launches today with a clear goal: to bring advanced AI into the physical world and build humanoid robots ready for real work, in real environments, at scale. UMA’s founders were instrumental in shaping the last decade of breakthroughs in deep learning, robotics and open-source AI. They are convinced that the next era of artificial intelligence won’t unfold on screens, it will happen in warehouses, hospitals, labs, factories and homes, where machines must face friction, unpredictability and human complexity. UMA is built for this transition: from digital intelligence to physical autonomy. AI Is Moving Off the Screen and into the World The past ten years gave rise to generative models, multimodal systems and language-based intelligence. The next decade will be defined by robotics, powered by an AI that can see, move, manipulate and make
FlightSafety International Appoints Eric Hinson as Chief Executive Officer1.12.2025 23:00:00 CET | Press release
FlightSafety International Inc. today announced the appointment of Eric Hinson as chief executive officer, effective immediately. Hinson will succeed former president Barbara Telek who recently announced her retirement. Hinson’s appointment marks a return to FlightSafety. He served as an executive vice president from 2009 to 2012 before leaving to be the president and CEO of Simcom International, Inc. Hinson started his aviation career as a naval aviator flying tactical aircraft in training, fleet, and operational test squadrons. Today, he is an active ATP-rated pilot with more than 5,000 total flight hours. He brings a unique operational perspective to the position—one that blends executive leadership with firsthand experience. In addition to FlightSafety and Simcom, Hinson has served in a variety of senior leadership positions at leading aviation companies, including Honeywell, Gulfstream, and Piaggio Aerospace. He also served as a board member of the General Aviation Manufacturer As
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom
