ACCESS Newswire

Gungnir Resources Inc.

Share
Gungnir Drills 6.67% Nickel Within 5.65 metres Grading 2.62% Nickel

SURREY, BC / ACCESSWIRE / September 21, 2021 / Gungnir Resources Inc. (TSXV:GUG)(OTC PINK:ASWRF) ("Gungnir" or the "Company") is very pleased to report additional high-grade nickel results from continuing drilling at the Company's Lappvattnet nickel deposit in Sweden. Today's results are expedited assays from hole LAP21-05 located 40 metres along strike of hole LAP21-02 which intersected 3.19% Nickel over 4.25 metres (see news releases dated August 31 and September 15, 2021).

Drill Hole LAP21-05 Highlights:

  • 2.62% Ni over 5.65 metres within a 14.00 metre interval grading 1.40% Ni
  • Peak of 6.67% Ni over 0.65 metres
  • High-grade Nickel intercept less than 60 metres below surface

Results Table:

Hole ID

From (m)

To (m)

Length (m)

Ni %

Cu %

Co %

PGEs (g/t)

LAP21-05

60.00

74.00

14.00

1.40

0.12

0.03

0.169

62.35

68.00

5.65

2.62

0.13

0.05

0.177

62.90

64.30

1.40

2.51

0.10

0.04

0.196

65.10

68.00

2.90

3.39

0.14

0.06

0.212

66.30

66.95

0.65

6.67

0.14

0.11

0.315

PGEs (g/t) = platinum (Pt) + palladium (Pd) + gold (Au)
Length = core length in metres

The high-grade nickel intercept in hole LAP21-05 consists of several sections of massive and semi-massive sulphides located at the upper contact of the host peridotite intrusion with the intercept located less than 60 metres below surface.

Hole LAP21-05 was drilled on Section 9E, 40 metres east of high-grade nickel mineralization recently intersected in hole LAP21-02 which drilled on Section 8E. LAP21-05 was one of three holes drilled on Section 9E testing a 90-metre interval up-dip of historic hole 2007-04 (0.97% Ni over 17.0 metres from 92.0 metres). Hole LAP21-05, along with LAP21-03 and LAP21-04 were all drilled at location 1,741,549mN and 7,165,169mE (RT90-2.5 co-ordinates) at an azimuth of 340 degrees. LAP21-05, a 100.3 metre hole, was drilled at a dip of -85 degrees, LAP21-04 was drilled 98 metres at a dip of -75 degrees, and LAP21-03 was drilled 77.5 metres at a dip of -45 degrees. Historic hole 74209 (2.87% Ni over 2.81 metres from 39.24 metres) is located between LAP21-03 and LAP21-04.

Drilling continues with tighter spaced holes at the shallow western part of the Lappvattnet deposit with a current plan of 15 drill holes covering a strike length of approximately 140 metres. Please link to accompanying attachment for plan map showing drill sections and a core photo of nickel mineralization in hole LAP21-05 (Figure 1).

Assays are pending for the lower portion of hole LAP21-05, as well as for holes LAP21-01, LAP21-03 to LAP21-06 and LAP21-08 to LAP21-10, all of which have been submitted to the lab. Drill core was logged and tagged for sampling at the Company's core logging facility in Lycksele then shipped to ALS Minerals' Core Services Laboratory in Mala. Core was sawed on site in Mala by ALS staff and prepped sample material was sent to ALS's Lab in Ireland. Core was analyzed for multi-elements using code ME-MS41, Cu OG46 analysis for >10000 ppm Cu, NiOG46 analysis for >10000 ppm Ni, and Pt, Pd, and Au were analyzed using fire assay method PGM-ICP27. Blanks and certified standards are routinely included in sample batches for quality assurance and control.

Gungnir's nickel resources in Sweden include Lappvattnet and Rormyrberget. In 2020, the Company updated both resources which collectively total 177 million pounds of nickel (see Technical Report with an effective date of November 17, 2020):

  • Lappvattnet: Inferred Resource of 780,000 tonnes grading 1.35% nickel for 23.1 million lbs (10.5 million kg) of nickel.
  • Rormyrberget: Inferred Resource of 36,800,000 tonnes grading 0.19% nickel for 154 million lbs (70 million kg) of nickel.

The technical information in this news release has been prepared and approved by Jari Paakki, P.Geo., CEO and a director of the Company. Mr. Paakki is a Qualified Person under National Instrument 43-101.

About Gungnir Resources

Gungnir Resources Inc. is a Canadian-based TSX-V listed mineral exploration company (GUG: TSX-V) with gold and base metal projects in northern Sweden. Gungnir's assets include the Knaften project which hosts a developing intrusion-hosted gold system, and VMS (zinc-copper) and copper-nickel targets, all of which are open for expansion and further discovery. East of Knaften, the Company holds two nickel-copper-cobalt deposits, Lappvattnet and Rormyrberget, with updated nickel resources. Further information about the Company and its properties may be found at www.gungnirresources.com or at www.sedar.com.

On behalf of the Board,

Jari Paakki, CEO and Director

For further information contact:

Head Office/Investor Relations
Phone: +1-604-683-0484
Jari Paakki, CEO
Email: jpaakki@eastlink.ca
Chris Robbins, CFO
Email: robbinscr@shaw.ca

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Forward-Looking Information

Certain statements in this news release may constitute "forward-looking information" within the meaning of applicable securities laws (also known as forward-looking statements). Forward-looking information involves known and unknown risks, uncertainties and other factors, and may cause actual results, performance or achievements or industry results, to be materially different from any future results, performance or achievements or industry results expressed or implied by such forward-looking information. Forward-looking information generally can be identified by the use of terms and phrases such as "anticipate", "believe", "could", "estimate", "expect", "feel", "intend", "may", "plan", "predict", "project", "subject to", "will", "would", and similar terms and phrases, including references to assumptions. Some of the specific forward-looking information in this news release includes, but is not limited to, statements with respect to: planned drilling activities and the expected timing thereof; expectations of additional high-grade nickel assays within the planned program, and Gungnir's plan for development of its properties and the timing thereof.

Forward-looking information is based on a number of key expectations and assumptions made by Gungnir, including, without limitation: the COVID-19 pandemic impact on the Canadian and global economy and Gungnir's business, and the extent and duration of such impact; no change to laws or regulations that negatively affect Gungnir's business; there will be a demand for Gungnir's services and products in the future; Gungnir will be able to operate its business as planned; and Gungnir's plans for future exploration and development of its properties is reasonable and will be possible within the anticipated timelines. Although the forward-looking information contained in this news release is based upon what Gungnir believes to be reasonable assumptions, it cannot assure investors that actual results will be consistent with such information.

Forward-looking information is provided for the purpose of presenting information about management's current expectations and plans relating to the future and readers are cautioned that such statements may not be appropriate for other purposes. Forward-looking information involves significant risks and uncertainties and should not be read as a guarantee of future performance or results as actual results may differ materially from those expressed or implied in such forward-looking information. Those risks and uncertainties include, among other things, risks related to: no certainty that any economically viable mineral deposit will be located on Gungnir's properties; that Gungnir may not be able to complete its planned drilling as anticipated; the impacts of the COVID-19 pandemic; ability to access capital markets; environmental matters; changes in legislation or regulations; receipt of required licenses, permits and approvals; and resource estimates may not be accurate and may differ significantly from actual mineral resources. Management believes that the expectations reflected in the forward-looking information contained herein are based upon reasonable assumptions and information currently available; however, management can give no assurance that actual results will be consistent with such forward-looking information. The forward-looking information contained this news release is expressly qualified in its entirety by this cautionary statement. Forward-looking information reflects management's current beliefs and is based on information currently available to Gungnir. The forward-looking information is stated as of the date of this news release and Gungnir assumes no obligation to update or revise such information to reflect new events or circumstances, except as may be required by applicable law.

SOURCE: Gungnir Resources Inc.



View source version on accesswire.com:
https://www.accesswire.com/664882/Gungnir-Drills-667-Nickel-Within-565-metres-Grading-262-Nickel

To view this piece of content from www.accesswire.com, please give your consent at the top of this page.

About ACCESS Newswire

DK

Subscribe to releases from ACCESS Newswire

Subscribe to all the latest releases from ACCESS Newswire by registering your e-mail address below. You can unsubscribe at any time.

Latest releases from ACCESS Newswire

The Michelin Guide Expands Its Global Footprint with the Arrival in Aotearoa New Zealand5.11.2025 20:00:00 CET | Press release

AUCKLAND, NZ / ACCESS Newswire / November 5, 2025 / Michelin is pleased to announce the arrival of the MICHELIN Guide in Aotearoa New Zealand, marking its first-ever expansion into Oceania. The inaugural edition will cover four vibrant culinary destinations: Auckland, Wellington, Christchurch, and Queenstown. Set to be unveiled in the middle of 2026, the restaurant selection process is already under way, as MICHELIN Guide Inspectors are currently on the ground, dining anonymously to identify the very best restaurants that showcase the unique character of Auckland, Wellington, Christchurch, and Queenstown culinary scenes. Gwendal Poullennec, International Director of the MICHELIN Guide states: "We are thrilled to bring the MICHELIN Guide to Aotearoa New Zealand for the very first time. The country offers a rich and diverse culinary landscape, shaped by its indigenous Māori heritage, Pacific influences, and a new generation of chefs who champion local produce with creativity and passion.

Loar Holdings Inc. Announces Date and Time for Third Quarter 2025 Earnings Conference Call5.11.2025 14:00:00 CET | Press release

WHITE PLAINS, NEW YORK / ACCESS Newswire / November 5, 2025 / Loar Holdings Inc. (NYSE:LOAR), will report Q3 2025 earnings before the market opens on Wednesday, November 12, 2025. A conference call will follow at 10:00a.m., Eastern Time. To participate in the call telephonically please dial +1 877-407-0670 / +1 215-268-9902. International participants can find a list of toll-free numbers here. A live audio webcast will also be available at the following link as well as through the Investor section of Loar Holdings website; https://ir.loargroup.com The webcast will be archived and available for replay later in the day. About Loar Holdings Inc. Loar Holdings Inc. is a diversified manufacturer and supplier of niche aerospace and defense components that are essential for today's aircraft and aerospace and defense systems. Loar has established relationships across leading aerospace and defense original equipment manufacturers and Tier Ones worldwide. Contact Ian McKillop Loar Holdings Inc.

New GA-ASI Gambit 6 UCAV Adds Air-To-Ground Operations for International CCA4.11.2025 16:00:00 CET | Press release

SAN DIEGO, CALIFORNIA / ACCESS Newswire / November 4, 2025 / The latest iteration of the innovative Gambit Series of unmanned combat air vehicles (UCAV) from General Atomics Aeronautical Systems, Inc. (GA-ASI) is Gambit 6, a collaborative combat aircraft (CCA) that adds air-to-ground operations to its already proven air-to-air capability. The multi-role platform is optimized for roles such as electronic warfare, suppression of enemy air defenses (SEAD), and deep precision strike, making it a versatile option for evolving defense needs. Air forces throughout the world are looking to air-to-ground-capable CCAs to enhance operational capabilities and address emerging threats in a denied environment. Gambit 6 is being developed to meet the corresponding need for adaptability, scalability, and mission-specific performance. "These are real threats, and they require real solutions," said GA-ASI President David R. Alexander. "The modular architecture and signature-reducing internal weapons bay

FiberCop and FMC GlobalSat/MTN Seal Strategic Partnership to Develop Hybrid Terrestrial-satellite Network Architectures in Italy4.11.2025 13:00:00 CET | Press release

The two companies have signed a strategic partnership aimed at offering high-speed connectivity across Italy, enabling high-performance backhaul and last-mile services by integrating satellite backhaul and fiber access in remote areas. ROME, ITALY AND FORT LAUDERDALE, FL / ACCESS Newswire / November 4, 2025 / FiberCop, the company running Italy's most advanced, extensive and widespread digital network infrastructure has signed a strategic partnership with FMC GlobalSat and its 100% owned subsidiary MTNSat "MTN", a world-class satellite network operator, to develop cutting-edge hybrid terrestrial-satellite solutions to deliver stable connectivity in remote areas across Italy. This agreement represents one of the first architectures of its kind developed worldwide over Low Earth Orbit (LEO) satellite networks. Altogether, both companies have successfully completed tests with hybrid network architectures that integrate LEO satellite services into terrestrial infrastructures, specifically

Sauce Labs Introduces Sauce AI for Insights: Purpose-Built AI Agents That Transform Software Quality Data Into Instant Engineering Intelligence3.11.2025 16:00:00 CET | Press release

Purpose-Built AI Agents Eliminate Hours of Manual Test Analysis, Accelerating Release Cycles and Empowering Engineering Teams to Ship High-Quality Applications with Unprecedented Speed and Confidence SAN FRANCISCO, CA / ACCESS Newswire / November 3, 2025 / Sauce Labs, the leading platform for continuous quality, today announced Sauce AI for Insights, a groundbreaking suite of AI-powered data and analytics capabilities that fundamentally transforms how engineering teams analyze, understand, and act on real-time test execution and runtime data to deliver quality releases at speed - while offering enterprise-grade rigorous security and compliance controls. As the industry's first AI agent purpose-built for software quality intelligence, Sauce AI for Insights converts one of the most critical bottlenecks in modern software development into a strategic advantage: the overwhelming volume of test data that slows decision-making and delays releases now accelerates developer productivity and en

In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.

Visit our pressroom
World GlobeA line styled icon from Orion Icon Library.HiddenA line styled icon from Orion Icon Library.Eye